| From | Message |
?
Dodge Dakota
JOIN HERE
5/14/2004
15:57:58
|
 Subject: Headers
IP: Logged
Message:
I'm doing my exhaust soon. Lo0king for affordable headers and looking for a high flow cat. I've made my mind up on the muffler (flowmaster 40 series single 2.5" in/out). Any suggestions? Thanx.
I have a 1998 3.9 Regular Cab
|
another mark
Dodge Dakota
JOIN HERE
5/14/2004
16:10:02
| RE: Headers
IP: Logged
Message:
Unless you get them used you won't find them cheap. JBA and
Gibson make headers for the 3rd gen 3.9s.
If you like loud then you will like the Flowmaster. I don't like
loud and went with Dynomax. Your size in and out is fine.
|
Grant
Dodge Dakota
JOIN HERE
5/15/2004
16:32:50
| RE: Headers
IP: Logged
Message:
Dropped JBA headers on my '93 3.9 w/ Flowmaster 40, kept the stock Y pipe and used custom tubes and 3" tip.
Sweetest sound I know.
|
Prizefytr
Dodge Dakota
JOIN HERE
5/15/2004
16:48:17
|  RE: Headers
IP: Logged
Message:
Grant...
Do the JBAs even come with a new Y-Pipe? I didn't think so.
?...
My friend with a 318 just got a set of Borla headers with a Y-Pipe. He seems to like it a whole lot but said there was no change in sound. Don't expect anything major if you get it on your 3.9, though.
|
Grant
Dodge Dakota
JOIN HERE
5/15/2004
16:52:34
| RE: Headers
IP: Logged
Message:
Kept the original Y pipe. I will try to post a video tonight on the web for you to hear the truck. Very different than stock. I think it is because of the flowmaster muffler though, not the headers.
|
Regular Joe
Dodge Dakota
JOIN HERE
5/15/2004
16:55:45
| RE: Headers
IP: Logged
Message:
Does actually having cat even make a difference in power. I`ve only owned my dak for 6 months and when I bought it buddy said he gutted it.
|
another mark
Dodge Dakota
JOIN HERE
5/15/2004
18:18:36
| RE: Headers
IP: Logged
Message:
The y pipe is sold separately by JBA and even in their own words
for a V6 its a waste of money. It's the exact same size as the
stock y pipe diameter. The only difference is their's is mandrel
bent.
|
GRant
Dodge Dakota
JOIN HERE
5/15/2004
23:33:15
| RE: Headers
IP: Logged
Message:
Go here and click the pic for the video.
http://members.rogers.com/patricia-grant/Truck/Truck1.htm
I have a carsound cat as well. The cat has a 3" in/out. Master Performance in Brampton Ontario did the install. They custom bent and welded the remaining pipes.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
