| From | Message |
stumpy
Dodge Dakota
JOIN HERE
5/12/2004
14:47:47
|
 Subject: Push Rods
IP: Logged
Message:
Will i need to change my push rods if i'm upgrading my roller rockers from the 1.6 to 1.7? Also what about my valve covers will i need to do anything with those too?
Thanks
Stumpy
99 V6 3.9l RC DAk 5-spd
|
Steve Baldwin
Dodge Dakota
JOIN HERE
5/12/2004
17:35:13
| RE: Push Rods
IP: Logged
Message:
Why are you going from 1.6 to 1.7 roller rockers?
|
another mark
Dodge Dakota
JOIN HERE
5/12/2004
18:07:39
| RE: Push Rods
IP: Logged
Message:
No on push rods. I'm doing the same thing. Got the Harland Sharp 1.7s. As far as the valve covers I know someone on here has said they had the same roller rockers and didn't modify their valve covers because of any clearance issue. I wound up buying some modified ones anyway to be safe. You can always either beat the baffling in yourself 1/2" or so or just buy them modified from socaldakota.com. Do not remove the baffles all together because all your oil will go into your intake.
|
Jon
Dodge Dakota
JOIN HERE
5/12/2004
18:56:10
| RE: Push Rods
IP: Logged
Message:
I have the Crower 1.7rr. You keep the same pushrods and just hammer the oil baffles down a little bit. No big deal. It took me about 2 hours to completely install and adjust them.
-Jon
|
stumpy
Dodge Dakota
JOIN HERE
5/12/2004
22:09:52
| RE: Push Rods
IP: Logged
Message:
Thanks for the help i just needed some conformation on the subject. So i will then just bang in the baffles and no push rods.
Stumpy
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
