| From | Message |
sicminds
GenIII
5/05/2004
11:04:44
|
 Subject: Oil Pressure Gauge Install-Parts Help
IP: Logged
Message:
Can’t quite figure out how to hook up this auto meter oil pressure gauge.
Any help would be appreciated
click me
|
DeepPurple
*GenIII*
5/05/2004
11:17:05
| RE: Oil Pressure Gauge Install-Parts Help
IP: Logged
Message:
We use to use a "T" fitting under the dash sending unit, and come off there with a gauge connection. Not knowing for sure how your's hooks up or the room for a "T", it might give you an idea how to run it. Good luck.
|
sicminds
GenIII
5/06/2004
11:41:28
| RE: Oil Pressure Gauge Install-Parts Help
IP: Logged
Message:
thanks, so i need to look under the dash? I know the whole gauges thing pops off is it somewhere in there?
click me
|
IntenseDak39
*GenIII*
5/06/2004
11:48:32
| RE: Oil Pressure Gauge Install-Parts Help
IP: Logged
Message:
he didnt mean it's in the dash. He meant the sending unit for the gauge in the dash.
it's located at the back of the block right next to the distributor. It's black and has a metal base. Just remove it, put a "t" fitting in there and then hook the stock sending unit on one end (top) then hook up the aftermarket parts to the other fitting. I did that to have an oil sorce for my turbo.
6.6 Lt. Big Block, 727 TF shift kit, 452 heads, edelbrock 750 cfm, .513/.513 284/300 crower cam, comp cams springs, comp cams pushrods, 1.5 roller rockers, dp intake, mopar ignition, mopar windage tray, dual exhaust w/ 40 series flowmasters, 4.10 gears, coilover drag suspension, approx, 3500 lbs
|
sicminds
GenIII
5/07/2004
10:19:04
| RE: Oil Pressure Gauge Install-Parts Help
IP: Logged
Message:
thanks intense....
click me
|
J and J Auto
GenII
5/07/2004
17:36:56
| RE: Oil Pressure Gauge Install-Parts Help
IP: Logged
Message:
mechanical guge requires a line run into cab
Use a tee with the elec type and be sure you put
the ground side diectly to engine block not in cab
or any other wire it will effect accuracy
Than both will work, if you disable the factory
sending unit you will throw a code and mil light
will come on
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
