| From | Message |
Jehosephat
Dodge Dakota
JOIN HERE
4/24/2004
22:38:31
|
 Subject: Blower
IP: Logged
Message:
My 94 dakota's heater blower motor doesn't work. The motor will run when I run power directly to it, and all the fuses are good, but it won't run. How do I troubleshoot the blower speed control switch?
|
Matt
Dodge Dakota
JOIN HERE
4/25/2004
02:29:09
| RE: Blower
IP: Logged
Message:
Unfortunatly mine started doing the same thing. It's strange tho, because if I play with it and put the engine at high vaccume (heavy acceleration), then the blower kicks in and is strong. I talked to a dodge service guy and he said it was a vaccuume problem with the dash control panel. Only problem is that it's one piece and all the controls come out as one piece. Of course the piece is dealer only and around $230. Needless to say, I'm going to live with crappy AC for a few more months.
|
hater
Dodge Dakota
JOIN HERE
4/25/2004
11:07:46
| RE: Blower
IP: Logged
Message:
the engine is pulling low vaccume to your accessiories during heavy acceleration moron
|
Jehosephat
Dodge Dakota
JOIN HERE
4/25/2004
13:55:30
|  RE: Blower
IP: Logged
Message:
I found the problem, which was oem number 4462841. It was on the passenger side firewall. A wire was broken.
|
L
Dodge Dakota
JOIN HERE
4/26/2004
11:15:23
| RE: Blower
IP: Logged
Message:
Yes Jehosephat .
It is called a heater motor " ballast resistor "
Seems they tend to ' rust out '
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
