Forums
Forum Tools
|
 |
00:03:13 - 12/20/2024
V6 Dakotas
| From | Message |
good ole dak
Dodge Dakota
JOIN HERE
4/23/2004
22:09:27
|
 Subject: engine speed at 75 Miles per hour?
IP: Logged
Message:
I have an 87 dakota with a 3speed tran (727 torqueflite) with 3.23 rear end gears I would like to know how fast does the engine turn over at 75-80 miles per hour.
Thanks kell
|
uh
Dodge Dakota
JOIN HERE
4/24/2004
09:43:29
| RE: engine speed at 75 Miles per hour?
IP: Logged
Message:
that depends on tire diameter as well. some large tires that fit the rear of Daks turn 720 times a mile while other turn as much a 950 times a mile, need to know that before anyone could give an answer. Then once you know the size of the tire, go to tirerack.com and look up the tire. a chart they provide will tell you how many times per mile the tire rotates, multiply that number by the 3.23 gear ratio to get engine speed at 60 mph. then divide that by 60 to get revolutions per 1 mile per hour, multiply revolutions per 1 mile per hour by speed, 75 or 80 in this case, to get rpm per 75 or 80 miles an hour,
A bit convoluted but it works.
|
Bob Lincoln
Dodge Dakota
JOIN HERE
4/24/2004
09:58:18
| RE: engine speed at 75 Miles per hour?
IP: Logged
Message:
Also need to know what size tire you're running (i.e., 225x15), as the circumference of the tire matters. The 727 had a 1.00:1 ratio in third, so the engine will turn 3.23 times faster than the axle. But as a rough estimate, without your tire info, 2800-3000 RPMs would be typical.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
