Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
22:48:49 - 12/19/2024

V6 Dakotas
FromMessage
TuckerLdlow
Dodge Dakota
JOIN HERE
 Email

3/13/2007
14:39:37

Subject: RE: larry, check this
IP: Logged

Message:
Tucker, Trucker - I answer to a lot of 'em.

OK, I see it now. In essence, he's gasifying the incoming air, huh? Sort of like putting a carb on top, in addition to the fuel injectors.



dakota49
Dodge Dakota
JOIN HERE
 Email

3/15/2007
11:54:39

RE: moparman
IP: Logged

Message:
Moparman, I put a new set of Bosch plugs in my '88 Dak, 3.9 V6 and it runs much smoother and I am getting better fuel mileage, I don't know just yet how much better cause I only have put about 100 miles on it since I put the plugs in and my fuel gauge is still in the first 1/16 of the gauge. I was using Autolites #63 copper, the Bosch have 2 ground posts. I have about 15,000 miles since I did a complete reman on engine. Oh yeah, its 4X4 also, 5 speed. I was still getting ove 15 even with the old copper plugs though. Oh yeah, on the dist. I took the hold down and ground down the center piece so I could advance the timing a little extra also. I am running 14 degrees ineacil advance, and 89 octane.
Hope this helps, Dakota49



moparman
Dodge Dakota
JOIN HERE
 Email

3/15/2007
12:09:47

RE: dakota49
IP: Logged

Message:
thanks ill try that. But now it did it twice yesterday when i start it i backed out of my drive way go to drive start driving it wont go. my foot goes about half way down and it dies down runs rough backfires maybe in the intake somtimes i can get it to clear up somtimes have to put it in neutral and restart then its fine.theres no warning when its going to do it almost got in an accident becouse of it. If u have any idea what could couse it PLEASE let me know.THANKS.



J and J Auto
GenII
 Email User Profile


3/17/2007
00:48:04

RE: larry, check this
IP: Logged

Message:
I was going to get one but can not get ahold of
RC Davis

yes it sends the atomized gas directly into the
intake the o2 sensor picks this up and trims back
the injector pulse width

This is the reason I built the straight bore
spacer I was going to send the atomized fuel
into the motor under the trottle body for a
more even distrabution threw the intake

The PCV to me seams rather 1 sided LOL

I am going to take a look at some of the other
fuel atomizes out there put fuel atomizer into
yahoo search and you wil find a few companies
making them

I want to test one for myself

Larry
J&J Auto

  <<Original Post <<Previous Page P 2


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.