Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
23:57:52 - 12/19/2024

V6 Dakotas
FromMessage
Daniel Loreno
Dodge Dakota
JOIN HERE
 Email

4/17/2004
13:28:53

Subject: Solution 94 3.9L?
IP: Logged

Message:
Maybe someone here has an idea what's wrong. I have a 94 3.9L carbeurated model that started sputtering one morning with a loss of power. That evening when I got back in it to go home it would idle for awhile then die then it wouln't even start. It has the same gas I drove 200 miles on the day before, I changed the fuel pump and it didn't help, and if I put a little gas in the butterflies it runs like a champ until all the fuel is burnt. Any ideas??



JFH
Dodge Dakota
JOIN HERE
 Email

4/17/2004
15:09:59

RE: Solution 94 3.9L?
IP: Logged

Message:
It has a Carb? 94 should be fuel injected!



yea
Dodge Dakota
JOIN HERE


4/17/2004
16:03:43

RE: Solution 94 3.9L?
IP: Logged

Message:
replace the fuel filter



duh
Dodge Dakota
JOIN HERE


4/17/2004
16:17:20

RE: Solution 94 3.9L?
IP: Logged

Message:
another dumazz just rang in! ya bone head FI Daks don't have fuel filters!
Dan unless the engine was replaced with another then the original you have a multi point FI system with a throttle body.
before I can really answer your Q Dan, I need to know what codes are showing, with trouble this bad there has to be at least one.



dak-n-duc
Dodge Dakota
JOIN HERE


4/17/2004
23:24:18

RE: Solution 94 3.9L?
IP: Logged

Message:
You know if it has a fuel pump relay switch? I found out it was the switch AFTER I replaced the pump on a grand-prix.Whole lotta work for nothing



93dak4x4
Dodge Dakota
JOIN HERE
 Email

4/18/2004
20:12:43

RE: Solution 94 3.9L?
IP: Logged

Message:
A mpi fuel injected truck has a fuel filter, i don't know what you are talking about. its on the driver side frame under the bed..you should change it.



dak-jak
Dodge Dakota
JOIN HERE


4/19/2004
10:57:35

RE: Solution 94 3.9L?
IP: Logged

Message:
Possible wiring problem !
Check harness between fuse box and firewall
drivers side , should see a " splice "
with about three wires , best to redo this
" splice " , get good connectors or SOLDER
it up..



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.