Forums
Forum Tools
|
 |
23:44:37 - 12/19/2024
V6 Dakotas
| From | Message |
chris
Dodge Dakota
JOIN HERE
4/16/2004
00:52:24
|
 Subject: flowmaster 40 series muffler v6
IP: Logged
Message:
What do you guys think about keeping all stock up until the muffler. put a new 40 series on the bad boy have it come in single out dule a few inches and then have the pipes dump before the rear wheels?? legal??? more horse power???? louder????
1991 dodge dakota 4x4 ex cab
kenwood cd player
1000watt sony amp
12" sony subs
brushgaurd with day lighters
lightbar with 4 daylighters
|
IntenseDak39
*GenIII*
4/16/2004
07:09:36
| RE: flowmaster 40 series muffler v6
IP: Logged
Message:
it's all the above
i did that at one point, but only used one tip. It sounds really good with the tailpipe. The 40 series starts to sound nasty when you dont have a tailpipe on it at all.
6.6 Lt. Big Block, 727 TF shift kit, 452 heads, edelbrock 750 cfm, .513/.513 284/300 crower cam, comp cams springs, comp cams pushrods, 1.5 roller rockers, dp intake, mopar ignition, mopar windage tray, dual exhaust w/ 40 series flowmasters, 4.10 gears, coilover drag suspension, approx, 3500 lbs
|
bump
Dodge Dakota
JOIN HERE
4/16/2004
12:53:30
|  RE: flowmaster 40 series muffler v6
IP: Logged
Message:
legal = ok
hp = yes , but could lose low end torque
Noisier = Yes
result = Lots of Noise , poor off line
possible increase in highway towing capability ??
|
IntenseDak39
*GenIII*
4/16/2004
13:29:47
| RE: flowmaster 40 series muffler v6
IP: Logged
Message:
poor off line?
just changing your muffler wont do that.
6.6 Lt. Big Block, 727 TF shift kit, 452 heads, edelbrock 750 cfm, .513/.513 284/300 crower cam, comp cams springs, comp cams pushrods, 1.5 roller rockers, dp intake, mopar ignition, mopar windage tray, dual exhaust w/ 40 series flowmasters, 4.10 gears, coilover drag suspension, approx, 3500 lbs
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
