| From | Message |
Jon
Dodge Dakota
JOIN HERE
2/19/2002
18:11:23
|
 Subject: v6 oil pressure
IP: Logged
Message:
Hi
I have a 1998 3.9 CC. What does your oil pressure read.
Mine is always just below the third line.
Would like to see what other v6ers have
Thanks
Jon
|
IntenseDak39
GenIII
2/19/2002
20:09:24
|  RE: v6 oil pressure
IP: Logged
Message:
during idle mine stays a little below halfway point but as soon as i hit the gas it jumps to about 3/4 position.
intense
"How's my driving?........Race me and find out!"
|
scott
Dodge Dakota
JOIN HERE
2/19/2002
23:47:17
| RE: v6 oil pressure
IP: Logged
Message:
I concur with IntenseDak,mine runs the same as his does.
|
BlackDakRacer
Dodge Dakota
JOIN HERE
2/20/2002
00:15:23
| RE: v6 oil pressure
IP: Logged
Message:
same hur
~~Eric
|
Drew
Dodge Dakota
JOIN HERE
2/20/2002
10:04:43
| RE: v6 oil pressure
IP: Logged
Message:
Mine is about the same. just over 1/2 to 1/3
|
mdandl
Dodge Dakota
JOIN HERE
2/20/2002
12:32:49
| RE: v6 oil pressure
IP: Logged
Message:
replace oil psi sending unit, i work on a lot of these trucks, every one so far has been sender
|
BlackDakRacer
Dodge Dakota
JOIN HERE
2/20/2002
12:34:31
| RE: v6 oil pressure
IP: Logged
Message:
higher pressure is better than no pressure, ;)
~~Eric
|
Leah
Dodge Dakota
JOIN HERE
10/04/2010
22:05:13
| RE: v6 oil pressure
IP: Logged
Message:
mine just stays below the low line but goes up to half when i rev to 2000 rpm ? is this also a sending unit issue?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
