| From | Message |
Keith
Dodge Dakota
JOIN HERE
4/04/2004
00:56:48
|
 Subject: ? for Larry
IP: Logged
Message:
Hey larry i just got my 1999 3.9L 4x4 dakota today and i also order a K&N intake for it
57-1509 for it because i want it to get better gas milage and some more power. do you know if i will have to mod it at all or will it bolt right up. also how much power will i gain with it. thank larry
|
u dont
Dodge Dakota
JOIN HERE
4/04/2004
04:46:15
| RE: ? for Larry
IP: Logged
Message:
need larry for these questions, leave the dude alone for the minor stuff. it will bolt right up. the onyl trhing u may have to mod is the cruiz control but otherthen that ur all set have fun
|
TOMZ
Dodge Dakota
JOIN HERE
4/04/2004
15:59:15
| RE: ? for Larry
IP: Logged
Message:
Keith, as u dont said this will be a nice mod but while you have the intake off clean up the throttle body. Take the AIS out of the throttle body and clean it with throttle body cleaner. Also at this time check your dist. cap and rotor for wear and replacement. As well as the wires and plugs.
|
J and J Auto
GenII
4/04/2004
21:56:31
| RE: ? for Larry
IP: Logged
Message:
It will fit with very little modding to the unit
it will just sit in a little diff position by
just bolting it on the mount will be a little
differant
http://www.kandn.com/dynocharts/57-1509.jpg
The 5.2 shows a 10.7 hp gain so just remove
25% about a 5 to 8 hp gain better throttle
response and they will help gas mileage 1 to 2mpg
The cold air is the first thing to do on these
trucks
After the cold air is on try a set of autolite
AP3923 at .045
Next would be a bigger throttle body
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
