| From | Message |
tyler
Dodge Dakota
JOIN HERE
4/02/2004
21:00:20
|
 Subject: valve rattle
IP: Logged
Message:
vales are growling at me ??????????
lots of rattle what are the ajustment specs.
93 3.9v6
|
J and J Auto
GenII
4/02/2004
21:21:58
|  RE: valve rattle
IP: Logged
Message:
No adjustment on the 3.9 93
Are you sure its not timing chain rattle
Bend down in front of the truck while idleing
like your going to look under the truck and see
if you can hear it.
New chain with tensioner needed to fix this noise
If the lifters are ticking you can try some
marvel mystery oil or CD2 also made by the
turttle wax company and it does help quit them
down on some trucks, if that don't do it replace
them $114 lifters, $35 intake gasket and replace
plenium gaskit $10 plus your labor easy to replace
and while the intake is off gasket match the port
but leave internaly the same, gives good low end
gains with mid and top end benifits as well
Takes about 2 to 3 hours to match them. the gains
are well worth the time spent.
Larry
J&J Auto
|
another mark
Dodge Dakota
JOIN HERE
4/03/2004
01:58:46
| RE: valve rattle
IP: Logged
Message:
Hey Larry are you saying by gasket matching the port that the gaskets cover part of the port?
|
no
Dodge Dakota
JOIN HERE
4/04/2004
11:04:19
| RE: valve rattle
IP: Logged
Message:
just the opposite the gasket does not cover any of the port.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
