| From | Message |
redneck dak
Dodge Dakota
JOIN HERE
2/17/2002
11:03:55
|
 Subject: 2x4 v6 handle 33 BFG?
IP: Logged
Message:
I want the 33's
what do i need
money is no thing.
Do i need a lift, and how big
i was thinking of 6". Suspen
how much do you think this lift
would cost
also keep in mind that i have 3.55's
will those need to be changed?
thanks
|
Joe E.
Dodge Dakota
JOIN HERE
2/17/2002
14:26:06
| RE: 2x4 v6 handle 33 BFG?
IP: Logged
Message:
Hold on budy.
You need to think about this and do some research. I dont know what year Dak you have. I have a gen I. Good thing you gotta 2wd to tell you the truth. You can get a 3in suspension and 3in body lift. Then you can probably run 33s. Expect to pay about a grand on lifts if you have them installed by a shop. A little cheeper if you do them. But I dont recomend it. Your 3.55s will work but you should get 3.91 or 4.10s to be right.
Your V6 should also get a few mods. headers, MSD, Flowmaster exhaust, K&N intake. Then youll be ok.
Check out www.truckinsuspension.com They have Dak lifts. Trailmaster and Perf. Accessories have body lifts. Good Luck my friend.
Joe E.
|
redneck dak
Dodge Dakota
JOIN HERE
2/17/2002
14:40:49
| RE: 2x4 v6 handle 33 BFG?
IP: Logged
Message:
i have 16 inch rims now.
i have been looking for tires
that fit that on the net and
i have yet to come across some.
my mods are as follows
9inch hombrew k & N
catback dauls
tps set to .76
IAT adjuster
|
IntenseDak39
GenIII
2/17/2002
20:07:32
| RE: 2x4 v6 handle 33 BFG?
IP: Logged
Message:
the best suspension lift for the two wheel drive is the Fabtech...easy to install and not as expensive...go to www.fabtechmotorsports.com. they have a two inch lift and a three inch lift.
i had the two inch and bernd here had the three inch and he had 32" tires so it won't take more than that. new gears would be neccessary if you wanted any takeoff.....the stock wouldn't like that tall of a tire
98 RC V6 auto modifications: LOTS ! ! !
|
Joe E.
Dodge Dakota
JOIN HERE
2/18/2002
00:01:31
| RE: 2x4 v6 handle 33 BFG?
IP: Logged
Message:
What year do you have? If you have a newer Dak, definitly go with Fabtech. They make quality stuff. But they are no good for older Daks. Also, try that truckinsuspension.com site and see if thier 4.5 in suspension lift will work for you. Dont know how they got around that R&P steering but its on their website. Good Luck.
Joe E.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
