| From | Message |
Micah
Dodge Dakota
JOIN HERE
3/28/2004
01:28:40
|
 Subject: POWER?!?!
IP: Logged
Message:
What would be the power gain if putting a cone air filter directly on the airhat without any hose or pipe. I know this wont do much but will it do something? What are some alterior options? Thanks
|
slow97dakota
Dodge Dakota
JOIN HERE
3/28/2004
10:48:10
|  RE: POWER?!?!
IP: Logged
Message:
it prob wont do much at all except for make more noise the power would stay the same cuz of all the hot air it would be suckin in. look up a homebrew intake and do that. the pipe is like 5$. the expensive part is the filter
|
Greg
Dodge Dakota
JOIN HERE
3/28/2004
19:38:02
|  RE: POWER?!?!
IP: Logged
Message:
Yes, unfortunately if anything it might actually hurt your power... Go to ebay and look up some of the homemade cold air intakes... That's where I got mine for right around $40 and I couldn't be happier with it... It's the one advertised as mandrel bent chrome plated tubing with the air filter on the end that has the inner and outer cone to it ; )) Or you can build your own and buy the very same filter for right at $5 by itself off of ebay as well... Either way would wind up better than the top mounted filter unless yours is carbed and or you've got a hood scoop to dirrectly feed it...
|
gchemist
Dodge Dakota
JOIN HERE
3/28/2004
21:20:49
|  RE: POWER?!?!
IP: Logged
Message:
For any 96 and older truck, you can just remove the factory plastic dam at the grill. I did it to mine. Works like a charm. You just have to clean the air assembly more often. You also have to use a very good air cleaner. You will have to replace it often or reoil a K&N.
|
bump
Dodge Dakota
JOIN HERE
4/20/2004
08:35:52
| RE: POWER?!?!
IP: Logged
Message:
bump
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
