| From | Message |
Ron Bushong
Dodge Dakota
JOIN HERE
3/27/2004
01:00:55
|
 Subject: Starter solinoid
IP: Logged
Message:
Dus anyone know how to fix or rebuild a starter solinoid on a 92 with a v6,cause every time i try to start it,it just makes this clicking sound,but sometimes it starts ok
|
another mark
Dodge Dakota
JOIN HERE
3/27/2004
01:30:40
| RE: Starter solinoid
IP: Logged
Message:
Go to local parts store and buy a solenoid for about $30? It's very easy to drop the starter and replace the solenoid on it. Be careful not to lose any shims that may be between the starter and the block.
|
ShimlessDak
Dodge Dakota
JOIN HERE
3/27/2004
19:26:28
|  RE: Starter solinoid
IP: Logged
Message:
Shims??? Used here???
|
87dakota500
Dodge Dakota
JOIN HERE
3/27/2004
22:00:26
| RE: Starter solinoid
IP: Logged
Message:
hey i had the same problem with my 87 dakota I also have plenty of other problems with it to but neway on the drivers side there are two little computer box things make sure those are connected and shake them around a little of if you try and start it and it just clicks hit those softly and it should end up starting this is wat i did and now it starts fine which might of ment it being a ground
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
