| From | Message |
Mike E
Dodge Dakota
JOIN HERE
3/25/2004
09:01:38
|
 Subject: Ignition
IP: Logged
Message:
I was looking at the complete MSD igniton system on KRCperformance.com The system comes with MSD 6A ignition, Taylor 8mm Spiro-Pro wires (Red or Blue), Accell Brass Cap & Rotor. I was wondering if this will work on a 2000 RC Dakota with a 3.9L 5spd. Also if it does what kind of plugs should I run for this system plus a 75 shot nitrous kit.
Thanks:)
|
J and J Auto
GenII
3/25/2004
19:42:45
|  RE: Ignition
IP: Logged
Message:
Yes it will work but if you get a coil circit
trouble code you will need the tach adapter also
If using nitrious 3923 at .035
if not AP3923 plat tip at .060 if you also use a
hotter MSD coil or .045 with stock coil
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
