| From | Message |
Simpleman96
Dodge Dakota
JOIN HERE
2/14/2002
14:44:08
|
 Subject: BERND, IAT adj causes fault!
IP: Logged
Message:
I bought the adjuster a couple of months ago and installed it. Up to this point I hav not had to use it due to cold weather. It is wired as per your instructions (two whites to the sensor harness, two blacks to the PCM). I also installed a new aftermarket Iat sensor. I moved the sensor to the intake as well. As long as I run off of the sensor it will not give me a light. I turn the Ignition off, turn the adj on (12:00) and start the truck, light stays on. What do you suggest?
Its a GenII 3.9
|
Dodge MiCK
GenIII
2/14/2002
15:41:41
| RE: BERND, IAT adj causes fault!
IP: Logged
Message:
I don't see the point of relocating your sensor into your intake, AND getting an IAT switch. Kinda defeats the purpose. Should have just left the sensor. My opinion.
01 Sport 4x2 RC 3.9 3.55
Mods - IAT Adjuster, 3923's, 35% tint, Ractive CAI
Near Future Mods - 180 T'Stat, Clear Corners, TPS @ .75V
|
Simpleman96
Dodge Dakota
JOIN HERE
2/15/2002
04:20:11
| RE: BERND, IAT adj causes fault!
IP: Logged
Message:
The reason I did this was because I am in Sicily about 80 miles from South Africa. It gets hot hot hot, and the air even in the intake is 110deg+ in the summer. The adjuster I think is a necessary mod.
|
DUH
Dodge Dakota
JOIN HERE
2/16/2002
00:24:00
|  RE: BERND, IAT adj causes fault!
IP: Logged
Message:
HOW? in SICILY and 80 miles from South Africa?
Has the Planet Earth shrunk that much? Or is my Geography off? OR are my World Maps WRONG?
|
Simpleman96
Dodge Dakota
JOIN HERE
2/16/2002
05:27:18
| RE: BERND, IAT adj causes fault!
IP: Logged
Message:
Your Right! DUH
I am a retard. North Africa! anyway it gets HOT here
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
