| From | Message |
Tim
Dodge Dakota
JOIN HERE
2/14/2002
09:29:42
|
 Subject: Valvetrain Adjustment
IP: Logged
Message:
Does anyone have the procedure for adjusting the valves on a 98 3.9 Dak? I am getting a slight "tap" from one but I need to check them all. Thanks in advance, Tim
|
CW
GenIII
2/14/2002
09:39:13
|  RE: Valvetrain Adjustment
IP: Logged
Message:
No adjustment, sorry.
2001 RC 4.7 5sp 9.25" 3.92 LSD
Ported 68mm throttle body, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" cold air, Roadmaster active suspention, Removed Third cat. Electric fan Convertion, Awaiting HO cams.
Working on adjustable fuel pressure with return.
|
Tim
Dodge Dakota
JOIN HERE
2/14/2002
10:03:31
| RE: Valvetrain Adjustment
IP: Logged
Message:
Are you serious? There is no way to adjust the rocker arms or anything? Am I not asking this right? How would you remove the rockers, springs and push rods? Thanks again. Tim
|
bernd
*GenIII*
2/14/2002
10:11:57
|  RE: Valvetrain Adjustment
IP: Logged
Message:
The factory rocker arms are non-adjustable. Torque to spec and leave them alone. If they were adjustable roller rockers, then you can adjust them. They're hydraulic...no adjustment needed from factory spec (torque).
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
Tim
Dodge Dakota
JOIN HERE
2/14/2002
10:18:33
| RE: Valvetrain Adjustment
IP: Logged
Message:
OK, that is what I am trying to get at, sorry for the confusion. What are the torque specs for the rocker arms and what order do you torque them in? Once again, lil brain dead this morning, sorry for the confusion. :) Thanks Tim
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
