| From | Message |
93Dakota
Dodge Dakota
JOIN HERE
3/04/2004
18:11:48
|
 Subject: Larry...?
IP: Logged
Message:
I picked up my bosch 02 sensor, MO26 & MO28 cap
and rotor, as well as some Champion Truck plugs
the other night. The Dakota goes into the shop
next wed.
You told me I should also look into replacing
the EGR valve w/ transducer and while I was at
Autozone I found one that would work but it
was $80 instead of $50 like the one you
recomended me to get. Whats the part# and brand
name for the one you described and can I for
sure get this one at Autozone or Napa? Also the
02 sensor I got is the 18" one, also make 34"
I figured I got the right one since it was 60
as you said? Thanks!
|
93Dakota
Dodge Dakota
JOIN HERE
3/04/2004
19:15:44
|  RE: Larry...?
IP: Logged
Message:
Forgot to mention, Im looking at new wires and
what would you recomend is best for these Magnum
engines, part and # if you can? Thanks!
|
J and J Auto
GenII
 
3/04/2004
21:24:39
| RE: Larry...?
IP: Logged
Message:
If you have a stock ign reg wires will work fine
but if you ever plan on upgrading the ign than
the taylor 8mm or the MSD 8.5 are great wires
both about $60 a set
They will also transfer more volts to the
plugs because they have a lot lower resistance
per foot than std wires and do help a little
Also on a stock truck the champ truck plugs will
run good
The $50 EGR valve is the neihof brand sold at
checker auto or Parts America and other stores
don't know them all that is who has them in my
area
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
