| From | Message |
Wayne-O
Dodge Dakota
JOIN HERE
3/02/2004
00:33:31
|
 Subject: dual exaust Q ?
IP: Logged
Message:
im looking for some info, what type of dual exaust is on your 3.9 dakota EXT cab ?
i have a 2002. im still trying to figure out what to install with out changing the headers.
ps. i do NEED to pass emisions.
thanks Wayne-O
|
GB2000
GenIII
3/02/2004
01:16:40
| RE: dual exaust Q ?
IP: Logged
Message:
Most people use the "fake" duals... they use a single inlet/dual outlet muffler.
Most popular mufflers:
Flowmaster (40, 50, delta 40, or delta 50)
Dynomax 17748
max diameter 2.5"
Josh
Red 98 RC V6 2wd Single in/dual out exhaust (soon to be switched to a flowmaster 40 single in/dual out), s-bolt "mod", Edelbrock 10" round air cleaner w/ K&N air filter, removed rubber flap...and more to come
|
Red03dakota
Dodge Dakota
JOIN HERE
3/02/2004
10:08:42
| RE: dual exaust Q ?
IP: Logged
Message:
removed rubber flap? you talking about the flap where it driects the air into the fender for the facotry intake? or is there another rubber flap to remove?
|
GB2000
GenIII
3/02/2004
11:41:08
| RE: dual exaust Q ?
IP: Logged
Message:
The rubber flap at the very bottom left corner of that pic...
Josh
Red 98 RC V6 2wd Single in/dual out exhaust (soon to be switched to a flowmaster 40 single in/dual out), s-bolt "mod", Edelbrock 10" round air cleaner w/ K&N air filter, removed rubber flap...and more to come
|
another mark
Dodge Dakota
JOIN HERE
3/02/2004
13:19:28
| RE: dual exaust Q ?
IP: Logged
Message:
Here are pictures of the flap before and after you cut away some
of the material.
http://mark-world.com/dakota/flap.html
|
Red03Dakota
Dodge Dakota
JOIN HERE
3/02/2004
13:29:33
| RE: dual exaust Q ?
IP: Logged
Message:
cutting the flap away wont let water into the intake? i have the snorkel off the intake box. i just wanna make sure it is not gonna send water into the intake
|
another mark
Dodge Dakota
JOIN HERE
3/02/2004
14:42:13
| RE: dual exaust Q ?
IP: Logged
Message:
Alot of people on here have posted that it is not a problem with
regards to water getting in anywhere. If you like driving off road
and in huge puddles and what not, then probably not a good
idea. Remember the grill blocks this area.
|
GB2000
GenIII
3/02/2004
16:10:08
| RE: dual exaust Q ?
IP: Logged
Message:
I found it easier just ripping my entire flap off... took all but a minute. Then I spent a couple more minutes carefully removing those ugly plastic rivets.
Josh
Red 98 RC V6 2wd Single in/dual out exhaust (soon to be switched to a flowmaster 40 single in/dual out), s-bolt "mod", Edelbrock 10" round air cleaner w/ K&N air filter, removed rubber flap...and more to come
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
