| From | Message |
Jim
Dodge Dakota
JOIN HERE
2/24/2004
23:30:53
|
 Subject: What parts will I need?
IP: Logged
Message:
Since I am having the 1.7 roller rockers installed on my 93 dakota with various knocking coming from under the valve covers, is there any other parts that I will need other than new valve gaskets? I think this will solve the knocking. Thanks for your help ahead of time.
|
NAPA
Dodge Dakota
JOIN HERE
2/25/2004
07:29:02
|  RE: What parts will I need?
IP: Logged
Message:
if you use a little care the gaskets are rubber and reuseable.
sure the knocking isnt the timing chain ????
|
NAPA
Dodge Dakota
JOIN HERE
2/25/2004
07:29:02
| RE: What parts will I need?
IP: Logged
Message:
if you use a little care the gaskets are rubber and reuseable.
sure the knocking isnt the timing chain ????
|
Steve calabro
Dodge Dakota
JOIN HERE
2/25/2004
08:21:43
|  RE: What parts will I need?
IP: Logged
Message:
ive heard that if you put new rockers in, sometimes you have to rip out the baffles from inside the valve covers because the new rockers will hit them and that is bad. Steve
|
xmr
GenIII
2/25/2004
10:05:27
| RE: What parts will I need?
IP: Logged
Message:
There is no need to rip the baffles out. They can be bent down enough to clear the rockers using a 2x4 and a hammer. You just need to bend the ends until you have at least 1/8 inch clearance for putting oil in and letting the blowby out.
'98 cc auto /Home brew cold air with K&N,Dynomax, Superchip Tuner, 1.7 RR,, F&B tb. NAPA cap and rotor, 3923 plugs,relocated iat, 180 t'stat
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
