| From | Message |
Micah
Dodge Dakota
JOIN HERE
2/22/2004
23:34:49
|
 Subject: TB!!!!!
IP: Logged
Message:
Would it hurt or do any good to put a 50mm or 52mm tb on a V6?
|
J and J Auto
GenII
2/22/2004
23:43:27
| RE: TB!!!!!
IP: Logged
Message:
The bores on the V6 manifold is only 48mm going
bigger would do you no good and will effect the
low end performanc
The V8 throttle body has 50mm plates with a 48mm
torque step and will flow 635cfm
going with a bigger TB will give you the same
effect as a V8 body the low end will remain the
same or lose a little but you will gain on top
and mid range
a 48mm F&B will flow 660cfm
the fastman and F&B also give you low end gains
Larry
J&J Auto
|
Micah
Dodge Dakota
JOIN HERE
2/23/2004
00:47:49
| RE: TB!!!!!
IP: Logged
Message:
what comes stock on 99 dakota V6?
|
another mark
Dodge Dakota
JOIN HERE
2/23/2004
01:28:01
| RE: TB!!!!!
IP: Logged
Message:
Ours are 44mm and flow about 450 CFM
|
Roger
Dodge Dakota
JOIN HERE
3/05/2004
19:00:49
| RE: TB!!!!!
IP: Logged
Message:
I have a 85 V6 Dakotas What TB will work best for my truck
|
JFH
Dodge Dakota
JOIN HERE
3/05/2004
19:07:57
| RE: TB!!!!!
IP: Logged
Message:
There were no Dakotas in 85!
|
hmm
Dodge Dakota
JOIN HERE
3/05/2004
20:34:31
| RE: TB!!!!!
IP: Logged
Message:
yup another roger thread
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
