| From | Message |
stil2hi
Dodge Dakota
JOIN HERE
2/21/2004
11:10:33
|
 Subject: plugs and wires
IP: Logged
Message:
i have a dak sport with a 3.9 mag engine. i want to know what are the best plugs and wires to get for this engine.
|
J and J Auto
GenII
 
2/21/2004
11:15:57
|  RE: plugs and wires
IP: Logged
Message:
Napa MO26 and MO28 cap and rotor solid brass
incerts
Any 8 or 8.5mm wire like the taylor or MSD super
conductors both around $60 get a set for same
year 5.2 and they fit perfict with 2 wires left
over.
If you are stock go with the Autolite AP5224 gaped
at .045
If you have cold air and bigger TB AP3923 gaped at
.045
if your running a aftermarket IGN like the MSD 6a
and a hot coil open the gap to .060
Larry
J&J Auto
|
stil2hi
Dodge Dakota
JOIN HERE
2/21/2004
18:54:29
| RE: plugs and wires
IP: Logged
Message:
its a 2000 and all stock execpt a cold air intake
|
b1llyw
GenII
2/21/2004
22:10:19
| RE: plugs and wires
IP: Logged
Message:
I'll agree with Larry on the wires and the NAPA parts. MSD and Taylor are both good. If you don't want the extra wires you can get V6 sets and save a couple bucks. I'm not a huge fan of the autolites. I like the NGK 2262 plugs (ZFR5F11)myself. I've run Champion, Bosch, Autolite, and NGK and have like the NGK's most of all.
Bill White - KRC Performance
'95 CC 4x2, SLT - 408 is done, truck isn't
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
DakotaJeff
Dodge Dakota
JOIN HERE
2/21/2004
22:23:42
| RE: plugs and wires
IP: Logged
Message:
Hey guys..for a 99 3.9 I got a price locally of $85 for msd's 8.5...Is that resonable?
Jeff
www.angelfire.com/nj4/low99kota
|
MitchM
Dodge Dakota
JOIN HERE
2/21/2004
22:23:42
| RE: plugs and wires
IP: Logged
Message:
b1llyw
What do you think of Bosch wires and plugs. I
thought they had a pretty good reputation ???
I ask because I just got my Amsoil catalog and
they offer Bosch and I would like to order them
at the same time I order my oil.
|
b1llyw
GenII
2/21/2004
22:29:25
| RE: plugs and wires
IP: Logged
Message:
I liked the Bosch copper plugs most of all until I started using NGK. They're decent. Same for the Bosch wires. You can do better on the wires though.
$85 is a little high. You can get the MSD wires for less.
Bill White - KRC Performance
'95 CC 4x2, SLT - 408 is done, truck isn't
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
