| From | Message |
JFH
Dodge Dakota
JOIN HERE
2/19/2004
11:18:40
|
 Subject: Intake ? for Larry
IP: Logged
Message:
I have a 93 V6, I currently have a K&N filter in the stock intake, I was wondering if the K&N kit seen here http://www.knfilterchargers.com/search/product.aspx?Prod=57-1501
Would work better than the setup I have now.
|
whitedakota2
Dodge Dakota
JOIN HERE
2/19/2004
11:53:19
|  RE: Intake ? for Larry
IP: Logged
Message:
I'm not Larry but the K&N you are looking at will pull in hot engine air while having a K&N filter in the stock setup will pull more cold air allowing more HP to be produced. You do still have the tube hooked up to the area behind the grill right?
Just my $0.02 worth.
I hope this helps.
|
JFH
Dodge Dakota
JOIN HERE
2/19/2004
12:31:32
| RE: Intake ? for Larry
IP: Logged
Message:
yes, but that tube is very restriting
|
JFH
Dodge Dakota
JOIN HERE
2/19/2004
21:41:30
| RE: Intake ? for Larry
IP: Logged
Message:
K&N said I will notice a big difference, but I figured they would say that since they are selling the product!
|
J and J Auto
GenII
2/19/2004
23:19:32
| RE: Intake ? for Larry
IP: Logged
Message:
JFH
What you can do is get a K&N FIPK for a 97 or
newer V6 Dak and an air hat for a 97 or newer
Dak fron the bone yard and use there better setup
on the older trucks
The K&N for 92 to 96 is just a 14X3 round air
cleaner set up, is better than stock but the newer
setups are better yet
The tube and cone filter will draw cold air from
right in front of the fender well down hear the
fram and would work better.
Larry
J&J Auto
|
JFH
Dodge Dakota
JOIN HERE
2/19/2004
23:25:21
| RE: Intake ? for Larry
IP: Logged
Message:
Does anyone have pictures of this setup larry is talking about? I would like to see the 97+ FIPK on a GenII
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
