| From | Message |
jeffnovi306
Dodge Dakota
JOIN HERE
2/18/2004
22:30:41
|
 Subject: roller rockers
IP: Logged
Message:
where is the best price on roller rockers, and should I get 1.7 ratio? my 3.9 magnum has a v8 tb and dual exhaust, 180 stat and 19lb injectors. thanks!
|
another mark
Dodge Dakota
JOIN HERE
2/19/2004
00:34:57
|  RE: roller rockers
IP: Logged
Message:
See if you can get in on this deal you may still be able to:
http://www.dodgedakota.net/boards/per/9852.html
Special price for Harland Sharp roller rockers, don't need valve lashing. The price goes up $100 at the end of the month as the mfr is raising prices. If you can't get into the group buy get them through Summitracing.com Go for the 1.7. I just ordered these for my 3.9 (1999). I also have some custom valve covers with modified shortened baffles in them for clearance reasons. www.socaldakota.com can hook you up with a set of the covers.
|
JFH
Dodge Dakota
JOIN HERE
2/19/2004
08:50:12
| RE: roller rockers
IP: Logged
Message:
What do the covers cost? I couldn't find them on the site!
|
daddio
Dodge Dakota
JOIN HERE
2/19/2004
09:48:29
| RE: roller rockers
IP: Logged
Message:
E-mail Sam @ performanceparts@cox.net. He'll hook you up on the valve covers. You can even get them powder coated in different colors. About $100.00 I think.
|
Bags
Dodge Dakota
JOIN HERE
2/19/2004
19:05:22
| RE: roller rockers
IP: Logged
Message:
Is the price listed in the group buy per set of rrs? In other words, double the price per set for an 8-cylinder?
JB
|
another mark
Dodge Dakota
JOIN HERE
2/19/2004
19:55:41
| RE: roller rockers
IP: Logged
Message:
the price listed is what you pay, no doubling or anything, your typical set runs from $260-$330
|
tazzy
GenIII
2/19/2004
20:12:25
| RE: roller rockers
IP: Logged
Message:
Got mine Quick after I ordered..Wish I knew off the group buy..I got mine Just before it..
Install about 1.5 hours..But I dropped 2 push-rods into the galley..
Hell the hardest part was removing the valve covers..
I re used the old gaskets..
|
K-Dak
Dodge Dakota
JOIN HERE
2/19/2004
20:24:01
| RE: roller rockers
IP: Logged
Message:
Tazzy,
Did you like the Harland Sharp Roller rockers? Did you get the 1.7's?
|
tazzy
GenIII
2/19/2004
20:27:00
| RE: roller rockers
IP: Logged
Message:
So far So good..It pulls better on the Highway..
I got the 1.7's
|
another mark
Dodge Dakota
JOIN HERE
2/19/2004
20:31:29
| RE: roller rockers
IP: Logged
Message:
Hey Tazzy is there a break in period? Were they noisy and did they get quieter?
|
tazzy
GenIII
2/19/2004
20:34:10
| RE: roller rockers
IP: Logged
Message:
no break in...
no noise..
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
