| From | Message |
Micah
Dodge Dakota
JOIN HERE
2/15/2004
01:58:51
|
 Subject: ROCKERS
IP: Logged
Message:
I know everything about pre 1973 cars but nothing about modern cars. Can someone help me out... In a 99 dakota V6 mag, would i have do do anything to the computer if i installed 1.7 rockers or would it adjust? And would I have to install anything else with the rockers?
|
Deep Purple
*GenIII*
2/15/2004
07:52:57
|  RE: ROCKERS
IP: Logged
Message:
A set of RRockers and studs, keep you RPM's under 5000. If you want to go higher: guideplates and pushrods, and maybe valve springs too. The computer will learn probably in 200 to 500 miles. Oh yes, modify the baffle in the valve cover. Good luck.
|
b1llyw
GenII
2/15/2004
08:00:09
| RE: ROCKERS
IP: Logged
Message:
You don't have to install anything else with the rockers but....
If you combo that with a good air intake and maybe a throttle body and then a good exhaust setup, you'll be even happier. Especially on the intake side. There are greater gains in upgrading the stock intake side vs. the stock exhaust side.
Bill White - KRC Performance
'95 CC 4x2, SLT - 408 is done, truck isn't
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
