| From | Message |
JFH
Dodge Dakota
JOIN HERE
2/09/2004
11:12:27
|
 Subject: Gears?
IP: Logged
Message:
I have a 93 with a 3.9 I want to get some new gears, what should I get and where should I get them?
|
390
Dodge Dakota
JOIN HERE
2/09/2004
11:57:21
| RE: Gears?
IP: Logged
Message:
go with the 390's or 410's but i hear the 410's dont fit in the 8.25 case unless you modify the case or the gears, im sure sum 1 can clear that up. eather way the 390's would give u much better get up!
|
JFH
Dodge Dakota
JOIN HERE
2/09/2004
11:59:19
| RE: Gears?
IP: Logged
Message:
Where can I get them?
|
tazzy
GenIII
2/09/2004
12:08:22
| RE: Gears?
IP: Logged
Message:
V-8 Perfomance
Randy's ring and pinion
|
JFH
Dodge Dakota
JOIN HERE
2/09/2004
12:20:24
| RE: Gears?
IP: Logged
Message:
Anywhere else, I want purchase online, not over the phone. Would Summit have 3.90's for a Gen II V6?
|
smoht
Dodge Dakota
JOIN HERE
2/09/2004
15:18:31
|  RE: Gears?
IP: Logged
Message:
wouldn't changing the gears for 355's to 390's/410's throw the mph on the dail off?
|
JFH
Dodge Dakota
JOIN HERE
2/09/2004
15:22:48
| RE: Gears?
IP: Logged
Message:
Thats not an issue, I can easily fix that, I just need something that can use the power I have added. Other than the gears, I will be adding the 1.7 Rollers. I think I found 3.90's at summit!
|
smoht
Dodge Dakota
JOIN HERE
2/09/2004
15:32:31
| RE: Gears?
IP: Logged
Message:
wasn't asking you if it was an issue, i was just asking a stupid question that i basically already knew the answer to, so i could then ask, how would you fix such a thing, besides tire size.
-not to be an a s s hole-
|
JFH
Dodge Dakota
JOIN HERE
2/09/2004
15:41:24
| RE: Gears?
IP: Logged
Message:
It's all computer settings! I have a friend who works for a dealer, so I can have him reset everything. There are places you can buy your own computer to make those types of changes, but I don't know where to get them or what they cost.
|
whitedakota2
Dodge Dakota
JOIN HERE
2/09/2004
16:29:01
| RE: Gears?
IP: Logged
Message:
For gears take a look at http://www.4wheelparts.com/
They also have the Dana Trac-Lok limited slip unit.
You can get your speedometer fixed by http://www.speedometer.citysearch.com/
|
sicminds
GenIII
2/09/2004
20:17:40
| RE: Gears?
IP: Logged
Message:
what is the difference in MPG and RPM's when switching from 3.55's to say 4.10's or 3.90's.
How much would an install like that cost to have a shop do it?
click me
|
whitedakota2
Dodge Dakota
JOIN HERE
2/09/2004
20:27:27
| RE: Gears?
IP: Logged
Message:
Remember that tire size also plays a big part. If your tires are not as tall as stock than go to 3.90 gears, if they are taller than 4.10 are better. Also if you drive in town most of the time, lower gears won't bother you much. As for gas milage, my in town milage didn't change much going to 4.10 gears. But the quick starts are nice!
As for labor, $250 to $300 sounds about right. I had a friend that has a shop do it and a case of beer got mine put in. LOL
|
another mark
Dodge Dakota
JOIN HERE
2/09/2004
20:44:21
| RE: Gears?
IP: Logged
Message:
I got a quote of $195 for installation from a shop in the San Jose area.
|
sicminds
GenIII
2/09/2004
21:01:27
| RE: Gears?
IP: Logged
Message:
so is there an issue with the 4.10's? how much do the gears alone cost?
I think i might be able to get them put in for a case, hopefully.
click me
|
JFH
Dodge Dakota
JOIN HERE
2/10/2004
07:53:40
| RE: Gears?
IP: Logged
Message:
About $300 from Summit, but you can find them cheaper. Go to http://www.4wheelparts.com
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
