| From | Message |
Deep Purple
*GenIII*
 
2/01/2004
14:14:44
|
 Subject: Valve springs
IP: Logged
Message:
Has anyone installed Crower 68405 valve springs? Is there anything special about installing the inner valve spring. The kit included a spring cup, but that raises the inner and outer spring up the distance of the factory spring step. It just doesn't look like something is right. If it's wrong, valves may try to exit through the oil pan. Any help would be deeply appreciated.
|
J and J Auto
GenII
2/01/2004
17:20:51
| RE: Valve springs
IP: Logged
Message:
Contact crower and see what they say, I always
went with the R/T springs retainers and keepers
they go right on the V6 heads good for 6500 rpm
Never tried the crowers
http://www.crower.com/misc/contact.shtml
Larry
J&J Auto
|
whitedakota2
Dodge Dakota
JOIN HERE
2/02/2004
12:59:31
| RE: Valve springs
IP: Logged
Message:
There are High Pro springs in Mopar's performance book for magnum engines.
|
dodgeboy
Dodge Dakota
JOIN HERE
2/02/2004
19:22:33
| RE: Valve springs
IP: Logged
Message:
Those are the r/t springs larry is talking about. Good for .525 lift and 6000rpm
|
gen1dak
Dodge Dakota
JOIN HERE
2/04/2004
08:29:29
| RE: Valve springs
IP: Logged
Message:
Trying to get a mental picture of this. What looks wrong? I'm guessing it looks wrong in an un-installed state, meaning the retainers and locks are not in place?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
