| From | Message |
v6DAKflow
Dodge Dakota
JOIN HERE
1/28/2004
22:50:51
|
 Subject: PHOTOS of my V6 DAK
IP: Logged
Message:
hey guys...here are a few pics of my 99 v6 dakota..LMK what you think of it...
My Dakota
|
jackAzz
Dodge Dakota
JOIN HERE
1/29/2004
05:43:34
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
Take that G off and burn it, ya cheese head.
|
IntenseDak39
*GenIII*
1/29/2004
08:57:19
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
nice tires!
everything else looks stock from there..
|
v6DAKFlow
Dodge Dakota
JOIN HERE
1/29/2004
13:29:07
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
Yea, I love the tires(31 X 10.5 X 16) as well...they give me so much more height than the stock tires...pretty much everything except the tires and exhaust are stock.
You can barely see my Flowmaster muffler in the first pic but I love my flow. The horsepower and noise are especially good. I also have a Line-X Spray-in bedliner that looks good too.
I'm not too keen with the modifications that can be done. What else could I do to make it look sharp.
|
Dianes 88 Dak
GenI
1/29/2004
13:53:10
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
Great lookin' Dak.
Hey, Stylin Concepts has some really nice front lisense plates. I can't use one, Mo has 2 plates, boohoo
Diane's 88 Dakota [MOPAR RULES...other's... well, you know]
|
v6DAKflow
Dodge Dakota
JOIN HERE
1/29/2004
13:58:34
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
Thanks Dianne!
Keep the feedback coming guys(Good or bad..lol). And any suggestions on anything I can do to the Exterior would be greatly appreciated. I'm going to try and get a pic up of my Flowmaster(Dual Exhaust) Tommorow afternoon.
|
paint
Dodge Dakota
JOIN HERE
1/30/2004
02:32:14
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
paint the bumper white, the door handles white and the mirrors white. anda add a cowl hood and roll pan and ur all set..nice truck
|
IntenseDak39
*GenIII*
1/30/2004
08:55:01
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
since you are going for the big tire looks, i would get at least the Fabtech 2" leveling kit. It raises the front end 2" to level it to the back. If you got some money, they also have a 3" kit but it costs about four times as much.
|
GB2000
GenIII
1/30/2004
13:17:54
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
Hey Greg, how easy is one of those kits for a do-it-yourselfer with very little mechanic experience? And save me a lil research...what's an approximate cost for that kit?
Thanks,
Josh
|
IntenseDak39
*GenIII*
1/30/2004
14:46:22
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
i bought one for $200.. came with 2" lift springs and shocks for the front... but i think you can just buy the springs now for around $100.
springs arent that hard to do... it saves you a lot of money doing it yourself. Just gotta be confident
|
dangerous
Dodge Dakota
JOIN HERE
1/30/2004
16:21:05
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
Hey nice looking dak man...is that a 4x4 or a 2wd?
I have a 2wd and im looking to put 31's on it, i just wanted to know if ya had to lift it all if it is a 2wd for those 31's.
|
v6DAKFlow
Dodge Dakota
JOIN HERE
1/30/2004
16:34:00
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
It is a 2WD and no I didn't have to do any lifting or anything....Those are the biggest tires you can put on without a lift. I love them.
So you can do the 2" lift for around $100? is that walking out the door or is that just the kit/springs itself? How much would labor cost on that because I would have no idea how to install it.
thanks and keep the comments coming!
|
Spiller
Dodge Dakota
JOIN HERE
1/31/2004
00:26:40
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
v6DAKflow,
What FlowMaster did you put on?
|
CubBlueDak00
Dodge Dakota
JOIN HERE
1/31/2004
01:48:04
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
With the raised height from your tires, you
don't lose any horsepower? I must say they're
nice looking.
|
sorta
Dodge Dakota
JOIN HERE
1/31/2004
02:06:43
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
you dont really lose hp from putting on bigger tires, it just seems that way because there heavyier, just put in sum 4.10's and u should b fine!
|
v6DAKFlow
Dodge Dakota
JOIN HERE
1/31/2004
09:12:53
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
I put in the "Force II" Flowmaster Exhaust System. With Dual Outlet Rear Exit.
|
dangerous
Dodge Dakota
JOIN HERE
2/02/2004
12:32:26
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
Im looking to put 31x10.5's on my 2001 2wd but i wanna get the bfg mud terrains. Do your tires rub at all? They fill your wheel wells really good which is something im looking for also. I dont wanna lift my truck if i dont want to (i dont like the huge space inbetween the tire and wheel well) but i dont want any rubbing also.
|
v6DAKflow
Dodge Dakota
JOIN HERE
2/02/2004
13:56:04
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
Actually the Mud Terrains might rub...The All-Terrains, barely miss the frame when you turn so before you put on mud terrains, I would advise you to make sure. Because of the longer ridges in them, I would assume that there would be some rubbing.
|
dangerous
Dodge Dakota
JOIN HERE
2/02/2004
14:54:37
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
Well i might go with the A/T's then. You say you didnt have to trim your wheel wells or fenders down at all?
|
v6DAKflow
Dodge Dakota
JOIN HERE
2/02/2004
15:33:24
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
Nope...they went right on. But the guy said that I don't need to go any bigger.
|
ZoSoAir
Dodge Dakota
JOIN HERE
2/02/2004
16:18:27
| RE: PHOTOS of my V6 DAK
IP: Logged
Message:
Hey V6DAKFlow, Can I assume since you have that "G" on the front you are somewhere in Ga, possible even near Athens or Lawrenceville? If so I think I may have seen your truck once or twice on SR 316. If you dont live around there, then still nice truck man.
Z
|
| | P 1 Next Page>> |
