| From | Message |
jeff
Dodge Dakota
JOIN HERE
1/28/2004
04:10:12
|
 Subject: 3.9 litre Firing order
IP: Logged
Message:
I need some help with the firing order after changing the dist. cap i beleive i might have mixed up the firing order. Can anyone tell me the how the cylinders are designated and is the rotation clock wise or counter if anyone has a wiring diagram would greatly help thanks Jeff
|
tazzy
GenIII
1/28/2004
04:16:40
| RE: 3.9 litre Firing order
IP: Logged
Message:
1-6-5-4-3-2
|
jeff
Dodge Dakota
JOIN HERE
1/28/2004
04:23:15
| RE: 3.9 litre Firing order
IP: Logged
Message:
Thanks Tazzy i already know that much as its stamped on the intake, what i need to know is which cylinder is which from the front of the motor is the drivers side #1 or passenger side, and the order Drivers side 1 2 3 or 1 3 5
|
Deep Purple
*GenIII*
1/28/2004
07:54:00
| RE: 3.9 litre Firing order
IP: Logged
Message:
Drivers side bank is 1 3 5. Pass. bank is 2 4 6.
Good luck.
|
J and J Auto
GenII
1/28/2004
13:50:03
| RE: 3.9 litre Firing order
IP: Logged
Message:
Standing in front of truck
6---5
4---3
2---1
FAN
clockwise rotation on dist
Larry
J&J Auto
|
Jeff
Dodge Dakota
JOIN HERE
1/28/2004
19:49:47
| RE: 3.9 litre Firing order
IP: Logged
Message:
Thanks all for the help , once you switch the wires around a couple of time you kinda loose trak of were ya started lol. But thanks to your quick responses i was able to figure it out no prob.BTW after getting your advice and sorting things out I realized at a closer look that the cylinder designation is also stamped on the intake. sometimes ya just gotta walk away for a bit. Thanks again..........Jeff
|
Pat
Dodge Dakota
JOIN HERE
3/28/2009
13:16:29
| Check engine light
IP: Logged
Message:
Anyone out there help me with a misfire?? changed cap rotor plugs plug wires and the 1 and 3 injector and still getting the code misfire on the 1 and 3?? anyone out there that can help
|
?
Dodge Dakota
JOIN HERE
4/02/2009
08:11:04
| RE: 3.9 litre Firing order
IP: Logged
Message:
Pat - Did you reset the computer in between ?
It remembers until reset .
If you don't have a scanner to do it
-disconnect battery negative - turn key on wait a few seconds , turn key off , reconnect battery.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
