| From | Message |
Keith
Dodge Dakota
JOIN HERE
1/24/2004
12:31:50
|
 Subject: Gibson or JBA headers
IP: Logged
Message:
I am wondering which ones I should purchase for my 02 3.9L Dak. Any feedback on which ones perform better and which ones are liked by you Dak owners?
|
Greg
Dodge Dakota
JOIN HERE
1/24/2004
12:58:48
|  RE: Gibson or JBA headers
IP: Logged
Message:
Gibson makes headers for the 3.9l??? Here I thought that JBA was the only one unless you wanted to make them yourself...
How much does Gibson charge for their headers???
|
Keith
Dodge Dakota
JOIN HERE
1/24/2004
15:53:10
| RE: Gibson or JBA headers
IP: Logged
Message:
Well www.stylinconcepts.com shows they have them for around $359.00 for Chrome and $429.00 for Stainless Steel for 1996-2004
|
Greg
Dodge Dakota
JOIN HERE
1/24/2004
16:36:45
| RE: Gibson or JBA headers
IP: Logged
Message:
$359.00 for the chrome one's isn't bad at all considering the JBA's are 4 or 5 something for the treated one's... Don't happen to know what guage steel they are do you??? Wonder how much chrome they actually have on them and how they would last against the heat and so forth... Well, I guess that's what you were asking in the original post though weren't you :)) Thanks for letting me in on this... Now all I have to do is a little more research... I bet there are some others out there too that we just don't reallize...
|
J and J Auto
GenII
1/24/2004
22:13:20
| RE: Gibson or JBA headers
IP: Logged
Message:
Gibson and JBA are almost identical in looks and
would bet the performance is very close to the
same on both.
I have also installed a few sets of the V6 headers
made by summit or eldebrock from summit they came
with a bigger Y pipe included but I think they
have discontinued making them, These were on the
pre mag trucks
Larry
J&J Auto
|
Shoe
Dodge Dakota
JOIN HERE
1/26/2004
20:32:06
| RE: Gibson or JBA headers
IP: Logged
Message:
Eldelbrock makes a set of "shorty" headers for V6.
They are for 87 to 91 I believe
Jeg's carry them
|
brianl
GenIII
1/27/2004
14:25:30
|  RE: Gibson or JBA headers
IP: Logged
Message:
Looks like the Gibson's are only available for the 2WD. Does anybody know the difference between the 2WD and 4WD header?
Thanks,
Brian
Dynomax UltraFlo, V8 TB, Alpine 6-disc, 180 T-Stat, PA 3" Lift, Prothane bushings, Autolite 3923, homemade intake, Rancho RS9000, Tonneau, Herculiner Sprayed-In, 33" Dueler A/T, AR Baja 16x8 Wheels, MOOG Balljoints and Ties, Powerslots w/ Raybestos PG pads
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
