| From | Message |
Jon F.
Dodge Dakota
JOIN HERE
1/17/2004
00:25:07
|
 Subject: Larry whats your opinion?
IP: Logged
Message:
Do you recommend the K&N Drop In, or the K&N Cold Air Intake for a 92 3.9 Magnum? What is the Horsepower gain each of these. Which one is worth it, or are they not worth the money? Thank you for you time.
|
tazzy
GenIII
 
1/17/2004
00:29:51
|  RE: Larry whats your opinion?
IP: Logged
Message:
I'm not as smart as Larry..
But I have a Drop in for sale.Cheap..
I did make my own CAI(cold air intake)
used a big K&N cone filter..
Truck Accelerates better now....
|
Tank
Dodge Dakota
JOIN HERE
1/17/2004
00:35:27
| RE: Larry whats your opinion?
IP: Logged
Message:
Hey tazzy. What did you mean by flashers when you responded to my Post about a Mopar Racing Chip for my 93 3.9l?
|
tazzy
GenIII
1/17/2004
00:41:56
| RE: Larry whats your opinion?
IP: Logged
Message:
Tank...Flash is what you can do to a V-6 PCM..
Since mopar do'nt make a performane one for us..
You send it out and they re-program your computer-(Flash)
|
Tank
Dodge Dakota
JOIN HERE
1/17/2004
00:45:25
| RE: Larry whats your opinion?
IP: Logged
Message:
So i can take it to a local Dodge dealer. ( We have a mopar dealer next door to a Dodge Lot) ? And I'm guessing it will cost about as much as the performance chip would run me? Thanks Tazzy for dealing with me. Heh. Just wanna do this right. :)
|
tazzy
GenIII
1/17/2004
00:47:54
| RE: Larry whats your opinion?
IP: Logged
Message:
dealer will not do it for you...
But there is a few places that will..I just don't remember who...
Try a search with" V-6 Flash"....something like that...
|
tazzy
GenIII
1/17/2004
00:55:39
| RE: Larry whats your opinion?
IP: Logged
Message:
Tank...Look into a "superchips" programmer..
I got one for mine..Works great
|
JimRoss
Dodge Dakota
JOIN HERE
1/17/2004
01:35:04
| RE: Larry whats your opinion?
IP: Logged
Message:
I'm doing a group buy on the superchips programmer right now. See my thread about it.
|
Tank
Dodge Dakota
JOIN HERE
1/17/2004
06:30:30
| RE: Larry whats your opinion?
IP: Logged
Message:
Thanks Taz :)
|
vern
Dodge Dakota
JOIN HERE
1/17/2004
07:50:25
| RE: Larry whats your opinion?
IP: Logged
Message:
hey tank what would you pay for a new performance pcm for your truck?
i have one,never installed,it has a $100 rebate if you send in your old pcm[the rebate may or may not be good now]
it,s for a 92-93 v6 dak,larry said it will work up to 95
|
Tank
Dodge Dakota
JOIN HERE
1/17/2004
14:41:06
| RE: Larry whats your opinion?
IP: Logged
Message:
Vern what are the gains on that chip? and How much :)
|
vern
Dodge Dakota
JOIN HERE
1/17/2004
15:24:24
| RE: Larry whats your opinion?
IP: Logged
Message:
it,s not a chip. it,s the pcm.
mopar performance PCM
i don,t remember the gains for sure,15-20hp/18-25tq
make me a real good offer and its yours.
i,m not looking to sell,but i don,t need it right now either.
i bought it for a truck but i sold the truck before i took delivery on it.
|
J and J Auto
GenII
1/17/2004
23:44:17
| RE: Larry whats your opinion?
IP: Logged
Message:
Jon F.
The K&N FIPK for the 92 is just a 14x3 round air
cleaner set up.
Depending on how much you want to spend a drop in
will help, better than stock.
What you can do is make your own with a K&N cone
and some 3" PVC
Or like we have been doing on the Gen 2 trucks is
get a K&N FIPK for a 97 or newer 3.9 Dak and an
air hat from the bone yard and with just a little
modification they will go right on and you will
have a very good cold air system.
Or other brands there are quite a few out there
that will work all you need is the newer style air hat.
Tank
The 92 mopar performance PCM will work on any
92 to 95 3.9 stick or auto trans.
Mopar claims 18 hp and 20 torque on a stock motor
However the performance PCM has more of a program
and will have more gains with more mods. I am running
1 on my stroker and its great, The ASE chip no longer
available had a lean out prob around 3000 rpm just like
the stock PCM just not enough of a program there.
I had to run an Apexi fuel controller but not with the
mopar PCM it has enough of a program to run my stroker
with the custom cam and ported heads
Mopar claims the PCM will run with aftermarket cams
intake exh ect and they were right.
Superchips 98 and up will not work on the older trucks
tazzy
There were places that would flash the OBD 1 comps
for the V6 but most will no longer do it.
Larry
J&J Auto
|
Tank
Dodge Dakota
JOIN HERE
1/18/2004
07:31:07
| RE: Larry whats your opinion?
IP: Logged
Message:
Thanks Larry. Was wondering if you could tell me how much they usually run ? Just turned 18, and would prolly need to start saving now lol. Thanks again Larry :)
|
TOMZ
Dodge Dakota
JOIN HERE
2/19/2004
18:21:25
| RE: Larry whats your opinion?
IP: Logged
Message:
vern, I'm interested in that pcm you have for the
dakota. If your really serious about someone taking it off your hands give me a heads up. By the way,
I've been running a k&n filter on my 92 since about 94 and it's worked great! Give it a try, it sure won't hurt anything.
|
gestalt
Dodge Dakota
JOIN HERE
2/19/2004
20:48:28
| RE: Larry whats your opinion?
IP: Logged
Message:
I have a '98 Dak made in February. Someone said the Superchips might not work for an early year model. This true? I'm asking here instead of Superchips because I want answers NOOOOOOOWWWW! muahahahah
words words numbers words
|
xmr
GenIII
2/19/2004
22:25:31
| RE: Larry whats your opinion?
IP: Logged
Message:
my 98 Dak was made in Oct. of '97 and the superchips works great.
'98 cc auto /Home brew cold air with K&N,Dynomax, Superchip Tuner, 1.7 RR,, F&B tb. NAPA cap and rotor, 3923 plugs
|
Zack
Dodge Dakota
JOIN HERE
3/09/2004
22:46:21
| RE: Larry whats your opinion?
IP: Logged
Message:
why wont the SC work on a 97
|
Zack
Dodge Dakota
JOIN HERE
3/09/2004
22:46:21
| RE: Larry whats your opinion?
IP: Logged
Message:
why wont the SC work on a 97
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
