| From | Message |
GREG K
Dodge Dakota
JOIN HERE
8/28/2007
10:10:41
|
 Subject: RE: v8 tb made my check engine light come on
IP: Logged
Message:
i installed one on a 1992 dakota with a 3.9 unbolt the battery for 5-10 minutes then bolt the connections back on i did this and the truck got a gain you could feel
|
pete
Dodge Dakota
JOIN HERE
9/15/2007
09:22:54
| RE: v8 tb made my check engine light come on
IP: Logged
Message:
the electic fan on my 2000 dodge did not stop even when the engin was shut down i drove it from a 2 hour trip getting home it just quit.I got it home and open the fuse reley box and tapped it and the fan shut down, now it won't start the instruments barly move , the motor turns but it doe not start I checked all the releys and fuses the all work exept the radiator electric motor reley.I know there is gas in the tank but the guage will show .Is there a button on the dodge dakota if the auto shut down sysytem is activated? If there is wher is it located
|
daddio
Dodge Dakota
JOIN HERE
9/15/2007
11:00:13
| RE: v8 tb made my check engine light come on
IP: Logged
Message:
have you checked your battery voltage?
there is an ASD(auto shutdown) relay. try swapping out another relay, like the a/c relay for the ASD relay.
|
MicroTech
Dodge Dakota
JOIN HERE
8/08/2008
18:45:17
| RE: 04 Dodge Dakota missing/runs rough
IP: Logged
Message:
04 Dodge Dakota missing & running rough---- check engine light comes on----THANKS for the info on your site about reading the codes---IF I am doing it correctly---reading the codes on the speedometer/trip display there is a P0300--Mulit cylinder misfire--P0300--#3 cylinder misfire and a P0305--#5 cylinder misfire.
This is my sons truck & we had some very severe weather here in Northwest INDIANA a few daya ago and he drove through a street that had a long stretch of standing water & shortly after that the symptoms started.
ANY ADEAS APPERICATED.
Thanks
Den
|
trev1
Dodge Dakota
JOIN HERE
8/08/2008
21:42:17
| RE: v8 tb made my check engine light come on
IP: Logged
Message:
Sounds like when he drove through the water he got water in the plug wires and posiblly the distributor. Take and pull one at a time and dry it out. Use a little WD 40 it will displace the water and help it dry out.
Hope this helps....
Trevor in SWMO
|
| | <<Original Post <<Previous Page P 2 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
