| From | Message |
Cal Dak
Dodge Dakota
JOIN HERE
2/07/2002
14:41:20
|
 Subject: Homebrew Intakes Q
IP: Logged
Message:
I know that you need PVC tubing with either a 90 degree elbow or two 45 degree elbows, a filter -
However, what do you need to connect the filter to the tubing and the tubing to the airhat?
Thanks for the help
|
DakSport
Dodge Dakota
JOIN HERE
2/07/2002
15:24:59
| RE: Homebrew Intakes Q
IP: Logged
Message:
Thats a good question Cal i was wondering the same thing. I guess ill try makin one. Which filter/size is the best to use?
Tks
2000 Sport V6 Auto
|
NY DAK
Dodge Dakota
JOIN HERE
2/07/2002
16:48:13
| RE: Homebrew Intakes Q
IP: Logged
Message:
Go to any home improvement supply store and ask for a 3x3" flex coupling they will know what your talking about, it's a rubber coupling with hose clamps on each end to tighten 2 45 degree elbows and a 3 ft piece of sch 30 3 inch PVC, make sure the elbows are sch 30 also I used the RU-3130 K&N for my 3.9 and it seems to be working fine, I couldn't believe the difference it makes when you punch the gas..the 3130 filter is a 3-1/2" mounting flange, 4-5/8" Filter base diameter, 3-1/2" filter top diameter and 7" filter length now most people talk about the 9 in filter so I'm not sure if I undersized this or not
|
DakSport
Dodge Dakota
JOIN HERE
2/07/2002
22:26:51
| RE: Homebrew Intakes Q
IP: Logged
Message:
I was wondering if the cold air filters get clogged easily just because of where they are located?
Tks
2000 Sport V6 Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
