From | Message |
Dak Rambo Dodge Dakota JOIN HERE
12/19/2003 18:33:10
|
Subject: kills in cold IP: Logged
Message: I have 95 dak sport v6 3.9
When the weather gets below 50 degrees
it will kill in idle until I warm it up for 10 min.
Once she gets warm she will run all day.
no problems in 70 degrees.
thank you for any help.
|
dakruzr Dodge Dakota JOIN HERE
12/19/2003 18:51:32
| RE: kills in cold IP: Logged
Message: I am having the same problem as you, last year i cleaned up the tb and sensors, and that helped/fixed the problem.
|
wadak Dodge Dakota JOIN HERE
12/19/2003 23:58:57
| RE: kills in cold IP: Logged
Message: Check your O2 sensor, recommended change at approx. 60,000 miles.
|
J and J Auto GenII
12/20/2003 00:52:43
| RE: kills in cold IP: Logged
Message: Check your IAT and Engine temp sensor,
Here is an earlier thread that tells you how to
check them.
If either of these 2 sensors are not working right
and telling the comp the engine is cold they will
not idle when cold
http://www.dodgedakota.net/boards/v6/6150.html
Also check your PCV valve and IAC
Larry J&J Auto
|
novice Dodge Dakota JOIN HERE
12/20/2003 10:09:58
| RE: kills in cold IP: Logged
Message: can you show me where on the engine these
sensors are?
Thank you
|
Jason 95 Dak Dodge Dakota JOIN HERE
12/21/2003 21:12:51
| RE: kills in cold IP: Logged
Message: Try replacing the EGR valve. I had the same problem on my 95 v6 Dakota. The port on the intake manifold was almost blocked solid with carbon. With a new valve and a clean port it's running great! Hope this helps.
|
cbinOhio Dodge Dakota JOIN HERE
12/28/2003 06:13:39
| RE: kills in cold IP: Logged
Message: My 98 v-6 had basically the same prob. Ping hard, ran rich when 1st started, then stalled every time the clutch was pushed in. Once it warmed up, it was ok. Read a lot of posts, took a guess on the temp. sensor. $13 @ Advance Auto.
After removing the Alt, and finally finding the stupid thing, replaced the sender and all seems well! No more stalling, no more rich running. The thing I don't like about it is you have to remove the alt or be a circus freak to get to the thing.
Can't wait to start to mod this thing!
Good luck!
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|