| From | Message |
southern118
Dodge Dakota
JOIN HERE
2/05/2002
21:57:43
|
 Subject: bernd help with a clutch
IP: Logged
Message:
I need a clutch and the only thing someone told me was speadtweaks. That didnt help because i have a 2000 dakota rc 3.9l. The clutch on the v8 and v6 are different and the clutch for the 99 is different dodge changing stuff like normal
|
Dak_Yoda
Dodge Dakota
JOIN HERE
2/06/2002
09:25:27
|  RE: bernd help with a clutch
IP: Logged
Message:
why on earth do you need a clutch?
did you destroy the one you have?
|
bernd
*GenIII*
2/06/2002
10:06:31
| RE: bernd help with a clutch
IP: Logged
Message:
How many miles are on the facotry clutch on the 2000 model and what's wrong with it?
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
Greg
Dodge Dakota
JOIN HERE
2/06/2002
14:27:00
| RE: bernd help with a clutch
IP: Logged
Message:
Just a heads up... I towed my truck (2000 cc v6)to the dealership last month because it wouldn't go into gear while the engine was running. They replaced the master cylinder (? the clutch cylinder, not sure if it's the master) and were still unable to get the truck in gear. The said they'd have to replace the clutch too (40k miles). I wimpered and thought it through over the weekend. Come monday they call and say the clutch is fine and that an air bubble was still in the clutch pump system or some $hit...needless to say they almost charged me $700 on top of the $400 pump replacment to replace a clutch that was fine.... I wonder if your in the same predicament.
|
southern118
Dodge Dakota
JOIN HERE
2/06/2002
15:18:32
| RE: bernd help with a clutch
IP: Logged
Message:
The problem with my with the clutch is that the throwout bearing is going out slow i can hear when i get on it. I refuse to go with a stock clutch because it is a piece. I need a place to find one. I can not see why i would just replace to throwout bearing and not replace the clutch. If the truck isnt going into gear it could be one of the master cylinder or slave cylinder. But i can hear it when i get on it. You know the sound that i am talking about dont you. It is the clacking noise when you get on it. then i aslo have the dreaded clunk while pressing the clutch in in ffirst or second at high rpms.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
