| From | Message |
quicklee
Dodge Dakota
JOIN HERE
11/23/2003
23:27:19
|
 Subject: what gears to go with
IP: Logged
Message:
topic says it all. the only mods to date on my 97 3.9L w/5speed are: iat sensor re-locate,carbed breather, timing advance, and single flowmaster dumped. need to know which gear to go with. i can get a whole rear for like $175 w/3.90's. would that be better? cheaper? than say some 4.10's or even 4.30's or 4.56's. i dont even know the size of my rear. and i do pull a trailer a lot. maybe 500lbs to say 3350lbs.(my stang)
|
slow97dakota
Dodge Dakota
JOIN HERE
11/24/2003
01:50:32
| RE: what gears to go with
IP: Logged
Message:
JUMP on that 3.90 rear set up!!! thats a good deal, seeing as the gears are like about 200?? 3.90s are real good for the 3.9's some people say the 4.10 are too much and doesent help much.
|
quicklee
Dodge Dakota
JOIN HERE
11/26/2003
20:07:05
|  RE: what gears to go with
IP: Logged
Message:
anyone else with some ideas...
|
Robert Balzer
Dodge Dakota
JOIN HERE
11/29/2003
23:05:10
| RE: what gears to go with
IP: Logged
Message:
Sounds like a good price on the 3:90 rear end. I have a 2003 3.9 automatic. It had a 3:55 and was really dead. I changed it to a 4:10 and really like it. Fuel milage is improved by 1 or2 MPG. I gained about 300 rpms at 70 mph. Didn't have to recalibrate anything, speedometer is right on.
|
Vegasoutkast
Dodge Dakota
JOIN HERE
11/29/2003
23:20:25
| RE: what gears to go with
IP: Logged
Message:
I have 3.92's in my rear and thank god for them!
I have a 8.25 rear and not sure if 4.56 will fit altho I know 4.11's will~
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
