| From | Message |
witsend
Dodge Dakota
JOIN HERE
11/23/2003
05:35:36
|
 Subject: pcm ?
IP: Logged
Message:
while back reset pcm started truck and farting and sputted etc... picked up whatever. Ok put v8 tb on awhile back try to reset pcm no fartin sputting about to cut off i dont think its reseting... could this be my battery b/c its old could it be somthing else is it suppose to do that about to cut off thing or what. I ask this b/c some say after 200 miles should "re-learn" well buddy it isnt. feels like a v6 tb on it i dunno what im doing wrong.... please help sorry dont have a real good s/n for here and havent joined so witsend will have to work
|
witsend
Dodge Dakota
JOIN HERE
11/23/2003
06:01:03
| RE: pcm ?
IP: Logged
Message:
well with the battery ? i was asking if the voltage was low would it not stay "LEARNED"
|
J and J Auto
GenII
 
11/23/2003
11:40:06
| RE: pcm ?
IP: Logged
Message:
Let it idle for about 5 min after the reset to
learn the idle
don't touch the gas at all
some trucks will do that
Larry
J&J Auto
|
witsend
Dodge Dakota
JOIN HERE
11/23/2003
11:58:47
| RE: pcm ?
IP: Logged
Message:
im going to do that now when i do the key thing do i turn it far as it can go or just to start position and hands off or have to hold far as key will turn? im running autolite 3923 could this be a prob i dunno brb gonna try the 5 minute thing ..........
|
witsend
Dodge Dakota
JOIN HERE
11/23/2003
12:19:38
| RE: pcm ?
IP: Logged
Message:
well i just did it and the rpm needle was still moving at 5 minutes so i let keep running took like close to 10 stop moving so i cut off cut back on drove a lil bit and im happier now.
thanks bud
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
