| From | Message |
Troy
Dodge Dakota
JOIN HERE
11/17/2003
18:50:43
|
 Subject: 3.9L V6 Engine kits
IP: Logged
Message:
I'm looking to rebuild my 98 v6 3.9l motor, and I'm looking for parts, ie: pistons, cam, timing chain, and so on, any kits out there????????? I don't want stock part either, aftermarket or performance is a must, any input would please!!!
Thanks,
Troy in florida
|
wg34
Dodge Dakota
JOIN HERE
11/17/2003
20:02:42
|  RE: 3.9L V6 Engine kits
IP: Logged
Message:
http://strokerkits.com/3_9_chrysler_stroker.htm its alot of $$$ though.
|
J and J Auto
GenII
11/17/2003
21:24:46
| RE: 3.9L V6 Engine kits
IP: Logged
Message:
You can also go with a set of Ross or Keith Black
pistons and have them made to a 10 to 1 ratio for
about $300.
Use some clivet steal back bearings and your all
set just 1 thing if the piston weight is more than
5 grams diff than stock get the assy ballanced
You can get cams or have one custom ground to
any lift and duration you want, I am running a
268 272 with a .480 lift with the 1.7 ratio rockers
You can also buy a modded intake or do your own
its not that hard to do
Larry
J&J Auto
|
jagbor
Dodge Dakota
JOIN HERE
7/04/2005
18:28:16
| RE: 3.9L V6 Engine kits
IP: Logged
Message:
Hey Larry-Thanks for all the great info especially for us guys with 3.9L engines. I have read alot of posts on here & was wondering what "realistic" suggestions you have for incrreasing HP from my pre-mag 1990 2WD x-cab auto Dakota(it only has 69,000kms on it but puts out a measley 125HP). I am not interested in peeling the tires off my truck but only want to get a little more HP to help tow a 1400lb Bolr/Trillium trailer. I have heard of porting/polishing heads + 3 angle valve job + install of new camshaft etc. What are your suggestions to get my truck up to 160HP? 175HP?
Thanks and have a great day!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
