| From | Message |
Rene
Dodge Dakota
JOIN HERE
11/02/2003
09:53:40
|
 Subject: Spark Plugs Wire
IP: Logged
Message:
I recently changed my oem spark plug wires to MSD 8.5 mm. It started ok, but went for a ride and noticed it started miss firing. I am assuming that I also need to replace plugs or the wires are to much for the application.
I only have the 180 degree stat install. I also bought the APP 5224 plugs, but not installed yet and not sure if they are right for the application after reading some subject in the V6 3.9 forum.
Can someone help or advise?
|
rigby38
Dodge Dakota
JOIN HERE
11/02/2003
10:04:06
|  RE: Spark Plugs Wire
IP: Logged
Message:
dude. you need the msd ignition to work with those wires.
|
LENE
Dodge Dakota
JOIN HERE
11/02/2003
10:13:52
| RE: Spark Plugs Wire
IP: Logged
Message:
DID YOU INSTALL THEM THE RIGHT WAY ?????
http://dodgeram.info/tsb/1998/18-48-98/18-48-98.htm
|
J and J Auto
GenII
11/02/2003
10:18:13
| RE: Spark Plugs Wire
IP: Logged
Message:
You don't need an MSD the bigger wires have less
resistance and will carry more volts across to
the firing point.
Be sure there on right
6 5
4 3
2 1
FAN
165432 clockwise rotation
Bad plug or carbon track on cap could
create a miss
I would exchange the APP for AP there is no
advantage they just cost more and gap them
.005 over factory specs
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
