| From | Message |
ScOtT
Dodge Dakota
JOIN HERE
10/05/2003
11:52:03
|
 Subject: Mods for V6
IP: Logged
Message:
What are the best mods to get for a v6 dakota, to make it a quick truck? and also would a straight pipe dual exhaust be a good mod for the v6???
|
slow97dakota
Dodge Dakota
JOIN HERE
10/05/2003
12:58:32
|  RE: Mods for V6
IP: Logged
Message:
a true duel exhuast would not be a god mod for the truck. it would lose way to much back pressure and you would lose alot of low end torque from it. for the ehxuast just change ur muffler get a 2 1/2 inlet with a 2 1/2 outlet. the mufflers with the duel outlets for sum reason will cause us to lose more low end too. in my opinion i thin kthat the best mods for your truck would be a cold air intake (you can make it your self) v8 thottle body swap, relocate your ait sensor from the manifold to the intake. it cost about $1 to do. and if your looking to go down this road you can pick up a set of 1.7roller rockers
|
V8
Dodge Dakota
JOIN HERE
10/05/2003
13:39:17
| RE: Mods for V6
IP: Logged
Message:
The best mod for making a V6 quicker is to buy a V8.
Quit your job at Burger King, go back to school and get an education and get a better job so you can afford a V8.
I know starting over after quitting in grade 2 is hard but you can do it, Timmy. You might also learn about doing searches and find out that you're the 500th moron to ponder aloud this very stupid question
|
IntenseDak39
*GenIII*
10/05/2003
14:20:58
| RE: Mods for V6
IP: Logged
Message:
and with the "500th moron to ponder aloud this very stupid question" comes the 500th jackass to reply "v8" as if replacing a V6 with a V8 answered the original question of "What are the best mods to get for a v6"...
actual mods are:
1.7 roller rockers
V8 throttle body
msd hardware
headers
cold air intake
performance muffler
awaiting big block install
|
xmr
GenI
10/05/2003
14:44:48
| RE: Mods for V6
IP: Logged
Message:
Intensedak, I is nice to see a courteous responsible reply. some how we seem the be attracting some strange folks that don't have any better manners than to be insulting or derogatory.
|
ScOtT
Dodge Dakota
JOIN HERE
10/05/2003
21:01:03
| RE: Mods for V6
IP: Logged
Message:
V8 just shut up, i am going to college and my job is ok, i have a good 10 grand saved up and i found a v6 truck with low miles for only 12000 and its very tempting i want a v8 but i might just go with the v6
|
k-dog
Dodge Dakota
JOIN HERE
11/27/2003
11:23:36
|  RE: Mods for V6
IP: Logged
Message:
V8 I gotta v6 and I'm probably one of those guy's you show up in a coruroy suit jacket and leather tie to ask for a job! Don't worry though, one day you'll mature, move out of the trailer park and/or your parents care and realize that helping someone is far better than being an ass.
|
FazDak
GenII
11/27/2003
15:34:58
| RE: Mods for V6
IP: Logged
Message:
Intense.................LMAO!!
|
latexsolarbif
Dodge Dakota
JOIN HERE
11/28/2003
21:25:12
| RE: Mods for V6
IP: Logged
Message:
ScOtT,you gotta let that engine breathe.ANY piston engine responds well to mods which open up intake&exhaust.3"k&n or comparable set-up,V8 throttle body(usually real cheap on EBAY)Crower and Mopar make tall roller rockers for the magnums.My v6 magnum responded best to the rollers.After intake(actually WHILE doing intake)it is best to do the exhaust as well.JBA makes headers for our v6's(I think Gibson does too but never seen them)and a good catback exhaust(cat-back,meaning behind the last cat converter).After the breathing is improved,anything you can do to make the spark brighter and longer(20 d/g dwell or less) will aid in pony gains.It is best to do research before you buy a product for performance gain,because you don't want to kill all of your botom end torque to gain hi rpm horsepower.You have to find a happy medium.IOW,you should decide if you want tire peeling take off or high powerband.In my experience you can't have both unless you drop a MClaren F11 v-12 in your truck.Good luck finding a salvage motor hee heehaw.hope I steered you in the right direction.Simple equation--air flow=HP AND what will blow up a gas station faster...a Bic lighter or blow torch?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
