| From | Message |
MikeS
Dodge Dakota
JOIN HERE
9/12/2003
12:17:48
|
 Subject: need help w/ TPS and IAT mods
IP: Logged
Message:
I have no idea where the IAT sensor is or what the hell it looks like so if you guys could shed some light on this for me, I'd greatly appreciate it. Also I read something about the TPS mod in another thread and it sounded helpful but the process wasnt really described very well. If someone (Larry..cough...cough) would be willing to lay it out for me in lay terms I'd really appreciate it. Thanks alot,
Mike
BTW, I am mechanically inclined. I've been building motorcycles for quite a while, I'm just new to the car tweaking scene.
|
TimG
Dodge Dakota
JOIN HERE
9/12/2003
12:50:12
| RE: need help w/ TPS and IAT mods
IP: Logged
Message:
Everything you ever wanted know about tweeking a Dak but were afraid to ask. http://www.speedtweaks.ca/tipsandtricks#TPS_Mod
The IAT sensor is located on the right side of the intake manifold towards the front
|
daddio
Dodge Dakota
JOIN HERE
9/12/2003
12:51:02
| RE: need help w/ TPS and IAT mods
IP: Logged
Message:
Check out www.speedtweaks.com, Tricks & Tips
full details on how to do the IAT & TPS mods.
IAT snesor is on intake manifold left side facing engine, #2 intake runner. big brass plug lookin thingie. need any help let me know. been there done that, got the t-shirt!
|
MikeS
Dodge Dakota
JOIN HERE
9/15/2003
11:08:08
| RE: need help w/ TPS and IAT mods
IP: Logged
Message:
I read both articles at the speedtweaks site and I'm still foggy on how to set the voltage on the TPS sensor. could someone please elaborate on this for me?
|
J and J Auto
GenII
9/15/2003
16:49:46
| RE: need help w/ TPS and IAT mods
IP: Logged
Message:
Once you have the bushings drilled out you put it
on the truck with 2 washers on the bolts snug
down turn the key on don't start now read the
voltage center wire and ground.
.7 .74 works good
You can change the voltage by turning the sensor
counter clickwise will raise the voltage at closed
position.
Than open and close throttle a few times and be
sure it returns to the low volts.
That's about it
Larry
J&J Auto
|
MikeS
Dodge Dakota
JOIN HERE
9/15/2003
17:08:02
| RE: need help w/ TPS and IAT mods
IP: Logged
Message:
Thanks Larry, you rock!!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
