| From | Message |
mike
Dodge Dakota
JOIN HERE
1/25/2002
15:58:29
|
 Subject: tb big problem
IP: Logged
Message:
i got a flometric 50mm t.b. i tried to install on my 99 dak i have a problem when i finish and started it up everything was ok till i tried to drive it the pedal wont move what is wrong. please but input i am stuck.
|
mike
Dodge Dakota
JOIN HERE
1/25/2002
17:58:05
| RE: tb big problem
IP: Logged
Message:
help please anyone
|
dakkid
Dodge Dakota
JOIN HERE
1/25/2002
19:46:21
| RE: tb big problem
IP: Logged
Message:
did u reconnect the throttle cable wrong?
did u put it in at all?
|
daksprt4x4
Dodge Dakota
JOIN HERE
9/20/2002
18:43:19
| RE: tb big problem
IP: Logged
Message:
i had the same problem with mine i got the directions of speedtweaks website. and theres a cam on the linkage and in their instructions it says v8 engines only. it must be a typo cause i ran it under the cam and everything was fine
|
Pistolero
Dodge Dakota
JOIN HERE
9/21/2002
02:22:21
| RE: tb big problem
IP: Logged
Message:
It's got to be your throttle cable. Recheck your routing, and make sure that it's not stuck or kinked, and that you installed it exactly like it came off. As the post above stated, there's a linkage cam on the V8 engines that isn't there on the V6's, so make sure your cable is routed correctly there.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
