| From | Message |
Spencer
Dodge Dakota
JOIN HERE
8/15/2003
15:33:43
|
 Subject: MAP sensor
IP: Logged
Message:
is there anything out that changes the signal from the map sensor to the computer, with my cam in the truck, it just started acting up and loading it up with fuel, almost to the point of flooding, i know it is because it is reading the smaller amount of vacuum from my cam at idle like i am flooring it with my factory cam, but i dont know of anything that can piggy back onto the map sensor to change the signal
|
Spencer
Dodge Dakota
JOIN HERE
8/15/2003
15:34:06
| RE: MAP sensor
IP: Logged
Message:
BTW...its an 88 3.9 5 speed
|
J and J Auto
Dodge Dakota
JOIN HERE
8/15/2003
23:57:58
| RE: MAP sensor
IP: Logged
Message:
Old Throttle Body injection
Get yourself a tee and a vacume guage and see what
kind of vacume its getting at idle.
A bad O2 sensor will do that to.
To much fuel presure should be around 13 to 14
pounds for the throttle body there is a regulator
on the system that also may be bad.
See what your vacume is at you need like 15 lbs
or is will sence a load and add fuel
Be sure you did not leave a vacume connection open
somewhere.
Larry
J&J Auto
|
Spencer
Dodge Dakota
JOIN HERE
8/16/2003
01:35:48
| RE: MAP sensor
IP: Logged
Message:
it is a brand new O2 sensor, i changed it with my exhaust...but i have just about decided for now on getting the 4 bbl intake and carb and running that, since i know someone that will hook it all up for me until i figure out how to run the injection
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
