| From | Message |
ben
Dodge Dakota
JOIN HERE
7/30/2003
14:12:24
|
 Subject: fuel injectors
IP: Logged
Message:
i was wondering if any body knew if i have to reprogram my truck to put the 19# 5.0 injectors on my 96 dakota sport v6.any help would be appreciated
|
J and J Auto
Dodge Dakota
JOIN HERE
7/30/2003
15:39:01
| RE: fuel injectors
IP: Logged
Message:
No you don't need to do anything it will trim the
fuel back in 50 miles and fully learn the new
injectors in like 200 miles.
I run them and they give you better mid and top
end performance and a smother idle and just a
smother run all accros the rpm range.
If you want you can reset your computer by
disconecting the Neg batt cable and turn the key
to start and hold it there for about 30 seconds
than turn it off and reconect the cable.
Do not touch the gas pedal if you reset just let
it idle for 3 to 5 minits to learn the new injectors
Larry
J&J Auto
|
TimG
Dodge Dakota
JOIN HERE
7/30/2003
15:39:08
| RE: fuel injectors
IP: Logged
Message:
I put the blueprinted 5.0 19# injectors in mine last week, I had the battery disconnected while I changed them and it started up and ran just fine afterwards.
|
ben
Dodge Dakota
JOIN HERE
7/31/2003
12:12:38
| RE: fuel injectors
IP: Logged
Message:
so even though my truck has an obd2 i dont have to repreogram it when i put them in
|
jay
Dodge Dakota
JOIN HERE
7/31/2003
18:05:52
|  RE: fuel injectors
IP: Logged
Message:
hey larry I have a 96 w/only a couple of mods like exhaust,and air intake would changing these injectors do much on a mostly stock engine or would I be wasting money?
|
J and J Auto
Dodge Dakota
JOIN HERE
7/31/2003
22:50:13
| RE: fuel injectors
IP: Logged
Message:
The FMS injectors are quiter and are matched
within 2% of each other and depending on the year
of your truck you can get design 2 or 3
4 holes design 2
6 holes design 3
With either the oval or rect plug from fiveomotorsports for like $175 $200 O Rings
all new on the injector ready to plug right in.
They will give you an overall smother running
motor over the factory 1 hole design matched
within 15%.
A nice upgrade over stock that they want $80 to
$120 each for, not worth it in my opinion
Larry
J&J Auto
|
Shank
GenII
7/31/2003
23:07:17
| RE: fuel injectors
IP: Logged
Message:
Yup, they are still sitting in the package next to me, waiting to verify Larry's satement.
Shank
|
jay
Dodge Dakota
JOIN HERE
8/01/2003
12:34:42
| RE: fuel injectors
IP: Logged
Message:
thanks for the info larry.
|
J and J Auto
Dodge Dakota
JOIN HERE
8/01/2003
13:17:52
| RE: fuel injectors
IP: Logged
Message:
Shank,
Get those 6 hole design 3 on so you can tell me
how they work than I will order a set, but I just
put the design 2 in about 10,000 miles ago and
they run very well.
I am probably overdriving them to 21 22 lbs
because I am running a differant pump and 51 psi
in my fuel rails.
I figured the stroker motor could handle it and it
does.
Larry
J&J Auto
|
87DakBuilder
Dodge Dakota
JOIN HERE
8/02/2003
03:14:55
| RE: fuel injectors
IP: Logged
Message:
Larry, any news at all on the stroker kits. I'm sure there are a bounch of us out here that still are interested. Let us know more plz.
87DakBuilder
|
ben
Dodge Dakota
JOIN HERE
8/03/2003
04:06:37
| RE: fuel injectors
IP: Logged
Message:
ive been runing the injectors for about three days now and there doing great.they helped me kick the crap out of a subaru legacy awd,and a 94 civic beehatch tonight at the street races.but i was wondering if maybe i could put 24lb injectors on my truck with out having the same kinda effect as when you put a to big throttle body on the v6?
|
Shank
GenII
8/10/2003
13:53:36
| RE: fuel injectors
IP: Logged
Message:
not necessarily ben, I asked Brian @ five0 & he said all your going to do is burn extra gas & flood the engine. Too much fuel & not enough Air.
Find a way to increase your Airflow another 50 percent & then go to the 24lb Injectors.
|
J and J Auto
Dodge Dakota
JOIN HERE
8/10/2003
21:12:36
| RE: fuel injectors
IP: Logged
Message:
Hey Shank,
Its Bruce not Brian at fivomotorsports.com
Get those lime green babies in so you can tell me
how the design 3 work.
I would think the 6 hole design would give even
better atomization than the 4's, better response
and gas milage.
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
