| From | Message |
Josh
Dodge Dakota
JOIN HERE
7/24/2003
23:16:28
|
 Subject: Cleaned out converter and still rattles?
IP: Logged
Message:
I recently cleaned out the converter and it still rattles because the air flow now has to go around the innerds of the converter. The sound is like rough wind through a hollow pipe and is sort of gets bothersome. Any suggestions on how to muffle it.
|
J and J Auto
Dodge Dakota
JOIN HERE
7/25/2003
01:56:52
|  RE: Cleaned out converter and still rattles?
IP: Logged
Message:
Take it off the truck cut a hole in the top and
remove all the crap you left behind, than weld the
hole shut and put it back on.
Wind through a hollow pipe, I hope so all the
pipes are hollow. LOL
Put a muffler behind it
Larry
J&J Auto
|
Josh
Dodge Dakota
JOIN HERE
7/25/2003
16:11:44
| RE: Cleaned out converter and still rattles?
IP: Logged
Message:
Thanks larry I will let you know how it goes
|
JTF
Dodge Dakota
JOIN HERE
7/26/2003
00:35:09
| RE: Cleaned out converter and still rattles?
IP: Logged
Message:
Cut the dang thing off... use a sawzall... cut it at both ends (as close as you can) and put in a peice of flex-pipe... clamp it at both ends... i did that with my 97 dakota... it worked out fine... i acutally get better gas mileage now
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
