| From | Message |
Alliance
Dodge Dakota
JOIN HERE
7/24/2003
05:13:24
|
 Subject: Power Alley
IP: Logged
Message:
99 v6 4x4
I was bummed to learn that there is no available chip for the v6
Other than exhaust and filter, what other non-machined additions can I do for a little extra pep?
|
digital
Dodge Dakota
JOIN HERE
7/24/2003
05:19:11
|  RE: Power Alley
IP: Logged
Message:
umm, where are you looking, JET and ASE both have computer chips/upgrades. i got one, mine is a 99 also.
digital
1999 3.9L SLT/Cold air intake/TB spacer/8.5mm MSD wires/MSD blaster 2/Autolite 3923/Borg-warner cap and rotor/crankcase breather/Toyo proxes s/t 275/60/15/catco hi-flow cat/custom dual straight pipes/stage 2 jet chip/ 180 t-stat/50 shot NOS :)/relocated IAT sensor/turbo in production
|
J and J Auto
Dodge Dakota
JOIN HERE
7/24/2003
08:44:50
| RE: Power Alley
IP: Logged
Message:
1.7 crower rollers are a nice upgrade and will
give you a very noticable 18 RWHP.
Combine those with a bigger TB cold air intake
and a low restriction muffler.
MSD and MSD coil with some 8.5 wires to burn the
bigger charge.
Now add your ASE Chip you will benifit more from
the chip after your getting a bigger charge into
the cyl's
Larry
J&J Auto
|
daddio
Dodge Dakota
JOIN HERE
7/24/2003
10:48:51
|  RE: Power Alley
IP: Logged
Message:
will those 1.7 crowers work well with the stock valvetrain? no clearence problems?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
