| From | Message |
brandon
Dodge Dakota
JOIN HERE
2/22/2004
00:53:46
|
 Subject: RE: Exhaust...
IP: Logged
Message:
well.....
i had a duramax on mine a month ago and dual exhaust and it sounded pretty pimp
currently ive got nuthin after the catalitic converter and it is really loud but it sounds soooooo good
and in the mail is a single outlet flowmaster 40 sereis which is supposed to sound really good and increase your hp, on this muffler they dont use packing so your free flowing and it sounds alot like straight pipes
but thats just what ive heard ill soon find out and let you know
|
Deep Purple
*GenIII*
 
2/23/2004
07:54:15
| RE: Exhaust...
IP: Logged
Message:
I've got a Gibson cat back on my truck. It has a very nice rumble at the exhaust tip but doesn't make a lot of noise in the cab. Good luck.
|
98 dodge
Dodge Dakota
JOIN HERE
1/22/2005
01:52:27
| RE: Exhaust...
IP: Logged
Message:
Anyone have any luck getting headers for the 3.9L? I was thinking it might help with the power and fuel economy.
|
joe
Dodge Dakota
JOIN HERE
1/22/2005
08:55:53
| RE: Exhaust...
IP: Logged
Message:
JBA has headers for the 3.9's
|
Jay Baricevac
Dodge Dakota
JOIN HERE
3/17/2005
20:06:20
| RE: Exhaust...
IP: Logged
Message:
JBA? whats that
|
trevner
Dodge Dakota
JOIN HERE
7/15/2006
21:50:04
| 02 dakota
IP: Logged
Message:
hey there,i jsut bought an 02 dakota with a 3.9L,jsut put on a poweraid throttle body spacer and an airaid cold air intake,now i want a nice sounds exhaust. Im thinkin a flowmaster 40 series,with some JBA or Gibsons headers,but i have a quick question,will it void my warranty to put on aftermarket exhaust and ehaders,and will it void my warranty if i take my cats out? and will i ahve any lights or any other problesm if i take my cats out? thanx guys
|
boomer
Dodge Dakota
JOIN HERE
7/16/2006
23:44:39
| RE: Exhaust...
IP: Logged
Message:
i just had a shop drill out 3 broken exhaust manifold bolts and put my jba headers on the other day. my exhaust after my y-pipe is pretty baked so i think i'm gonna go with the flowmaster 40 series with the single outlet. should sound pretty sweet and have enough back pressure so i dont lose any power...
speaking of which, i jsut read the post above and if you remove your cat, need i remind you its illegal (not that anyone really cares) but you will probably get abnormal readings from your rear O2sensor and you will lose a lot of backpressure. these are things ive been told about the 3.9, up to you to believe them. the guy at the shop was tryin to tell me to go strait pipes off my headers, but im not gonna take that risk.
|
Dakotaenginer
Dodge Dakota
JOIN HERE
7/25/2006
17:43:40
| RE: Exhaust...
IP: Logged
Message:
You will lose power because your backpressure will be all screwed up if you cut the cats out. You will also have trouble if you run duals, becuase they are too free flowing for the exhaust set up. single in and out is the way to go on the 3.9 6 cyl. New intake and a throttle body spacer is a must
|
zzark
*GenII*
7/25/2006
21:02:48
| RE: Exhaust...
IP: Logged
Message:
What did they charge to drill the studs?
|
ronnie
Dodge Dakota
JOIN HERE
7/31/2010
16:01:03
| RE: Exhaust...
IP: Logged
Message:
I have a 2003 3.9l dakota slt. Right now i have a rusted flowmaster single in dual out muffler. I am thinking about putting a cheap generic muffler on (same single in dual out) with dual glasspacks coming out of the back and no cat. Also maybe no cat with straight pipes down to dual glasspacks out the back. Then again, maybe flowmaster supper 44 series muffler and dual pipes. Any ideas on what to do? I want it loud but throaty. I know its a v6 but would like to get the best sound possible and as cheaply done as possible. Any suggestions would be helpful...Just as long as it dosen't sound ricey!
|
yea
Dodge Dakota
JOIN HERE
7/31/2010
16:06:31
| RE: Exhaust...
IP: Logged
Message:
well glass packs on a V6 are going to sound like
rice.
|
jacob
Dodge Dakota
JOIN HERE
8/14/2010
17:38:53
| RE: Exhaust...
IP: Logged
Message:
a good generic muffler that has the same thing as the 40 series flowmaster this is the link to the ebay page its the link to the kit but you could ask him for just the muffler http://cgi.ebay.com/ebaymotors/1987-2007-dodge-dakota-dual-exhaust-great-muffler-/360288673366?pt=Motors_Car_Truck_Parts_Accessories
|
| | <<Oringinal Post <<Previous Page P 2 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
