| From | Message |
GB2000
GenIII
3/25/2004
19:00:43
|
 Subject: RE: swaping out the 6 for a v8
IP: Logged
Message:
While it wasn't the smartest idea to post the number I hope you're being sarcastic...that's just plain low.
Josh
Red 98 RC V6 2wd Single in/dual out exhaust (soon to be switched to a flowmaster 40 single in/dual out), s-bolt "mod", Edelbrock 10" round air cleaner w/ K&N air filter, removed rubber flap...and more to come
|
dan
Dodge Dakota
JOIN HERE
8/14/2005
20:33:59
| RE: swaping out the 6 for a v8
IP: Logged
Message:
yup,im doin the big swap too. 78' 318[premag]into a 95 dak.it has a little 2.5 seized with good body.3.55s in rear which is fine alot of muscle cars had em.lsd would be cool.mike schumaker from engine-swap.com has the correct oil pan and mounts both for 600 bucks package deal.just do it. all bolt on. mopar dealer guys and speed shop people are morons. magnum blocks are different than premags, see for yourself.screw the efi,w/pcm, go carbureted ! hooker super comp headers fit good too or mopar performance.
|
98dakota
Dodge Dakota
JOIN HERE
4/29/2007
23:54:33
|  RE: changing from 3.9v6 to 3.3 v6
IP: Logged
Message:
can i change from a larger motor to a smaller one? I have a race truck that i blew the motor up and not a pretty sight.LOL and 3.9v6 is hard to find. can i put a 3.3v6 in its place?
|
98dakota
Dodge Dakota
JOIN HERE
4/30/2007
00:00:32
| RE: changing from 3.9v6 to 3.3 v6
IP: Logged
Message:
can i change from a larger motor to a smaller one? I have a race truck that i blew the motor up and not a pretty sight.LOL and 3.9v6 is hard to find. can i put a 3.3v6 in its place?
|
J and J Auto
GenII
5/01/2007
01:31:45
| RE: swaping out the 6 for a v8
IP: Logged
Message:
98dakota
Yes the smaller V6 will bolt right in all wireing
is the same you just don't use the #7&8 injector
plugs
You must also use the V6 computer and get the Vin
flashed posably
Most salvage yards sell the comp with the motor
Oh use the flex plate from the V8 the trans will
bolt right u than
Larry
J&J Auto
|
| | <<Oringinal Post <<Previous Page P 3 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
