Forums
Forum Tools
|
 |
23:31:58 - 12/19/2024
V6 Dakotas
| From | Message |
Chris Gilliam
Dodge Dakota
JOIN HERE
6/03/2003
16:51:30
|
 Subject: EVAP
IP: Logged
Message:
I own a 97 dodge dakota and recently my check engine light came on, i got it checked out and it said EVAP- incorrect purge flow... what do i need to do/replace
|
Jon
Dodge Dakota
JOIN HERE
6/03/2003
22:42:18
|  RE: EVAP
IP: Logged
Message:
You will need to check it with some evap test equipment, which is pretty expensive so your better off paying a shop. First though i would clear the code and see if it comes back. I don't know exactly which code you found (there are several for incorrect purge flow), but the code can be caused by anything from a loose gas cap, leak in the tank, filler tubes, tank, vapor lines, or charcoal canister. Or one of the vsv's could be bad (there are at least 2 of them). Or it could be a wiring problem, bad ecu or bad sensor. I haven't done any evap stuff on a Dakota but the majority of the evap problems that i see are:
-A loose gas cap or customer filling the tank with vehicle running.
-A stuck closed VSV
-If it had been in an accident i look for damage to the tank and lines.
Out of hundreds of evap problems i have diagnosed i have only found two bad ecu's and one bad canister.
-Jon
|
Chris Gilliam
Dodge Dakota
JOIN HERE
6/04/2003
02:56:26
| RE: EVAP
IP: Logged
Message:
Thanks, i'll check everything out and clear the code and see if it comes back
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
