| From | Message |
02dak
Dodge Dakota
JOIN HERE
5/27/2003
11:32:53
|
 Subject: power pulleys
IP: Logged
Message:
Can anyone tell me, do these things work? Where can I get one. Looked on truck performance but did not find any for 2002 3.9. I just want to know if i'm wasting my money. Oh, and another thing. Is it bad to use injector cleaner at each oil change? thanks
|
Ryan
Dodge Dakota
JOIN HERE
5/27/2003
13:06:23
| RE: power pulleys
IP: Logged
Message:
You wont really feel a big difference with the pullys, but they do give you a good amount of torque for the money about 25-30 ft/lbs and about 8 HP. To get these v6's moving you definitely need all of the torque you can get :) I sell them on my website check it out.
v8Performance.com - Dodge Performance Products
|
whitedakota2
Dodge Dakota
JOIN HERE
5/27/2003
14:00:22
| RE: power pulleys
IP: Logged
Message:
I have the full set from ASP (it uses the same factory belt) and I was very happy with the result. They do perform as Ryan says. I got mine through Summit Racing though.
|
02dak
Dodge Dakota
JOIN HERE
5/28/2003
10:54:43
| RE: power pulleys
IP: Logged
Message:
if you put a whole set on won't that affect your charging rate with the alternator or voltage while the truck is running like dimming lights and that kind of thing?
|
cal dak
Dodge Dakota
JOIN HERE
5/28/2003
21:19:55
| RE: power pulleys
IP: Logged
Message:
yup. i put on the alt. and crank pulley. the voltage meter at idle reads at like 10-11 volts. it does dim the lights but once over 1100 rpm it'ss got full charge.
Personally, i didn't notice any difference at all. sure when it's cold out there is a little more chirp after just starting the engine up, but nothing really noticeable.
|
IntenseDak39
*GenIII*
5/28/2003
21:35:02
| RE: power pulleys
IP: Logged
Message:
Ryan,
no offense but if they put out that much torque you better feel it. They offer complete three pulley kits for up to 98-99 models i believe and only like crank pulleys for the newer ones... the newer kotas really dont like the alt. underdrive.
SOLUTION: get a alt. pulley from a genII kota... they are a right inbetween the ASP and stock pulley so you dont loose all the volts.
1998 Regular Cab V6 Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
